NETGEAR UTM25EW-100NAS, UTM25-100NAS, UTM10EW-100NAS manual V1.0, September

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual

To manually configure the WAN1 ISP (UTM25) or WAN ISP (UTM10) settings:

1.On the UTM25, select Network Configuration > WAN Settings > WAN1 ISP Settings. The WAN Settings tabs appear, with the WAN1 ISP Settings screen in view (see Figure 3-1 on page 3-3, which shows the UTM25’s screen). On the UTM10, select Network Configuration > WAN Settings > WAN ISP Settings. The WAN ISP Settings screen displays. Figure 3-4shows the ISP Login section of the screen.

Figure 3-4

2.In the ISP Login section of the screen, select one of the following options:

•If your ISP requires an initial login to establish an Internet connection, click Yes (this is the default).

•If a login is not required, click No and ignore the Login and Password fields.

3.If you clicked Yes, enter the login name in the Login field and the password in the Password field. This information is provided by your ISP.

4.In the ISP Type section on the screen, select the type of ISP connection that you use from the three listed options. By default, “Other (PPPoE)” is selected, as shown in Figure 3-5.

Figure 3-5

3-6 Manually Configuring Internet and WAN Settings

v1.0, September 2009