NETGEAR UTM25-100NAS, UTM10EW-100NAS, UTM25EW-100NAS manual Manually Adding or Editing an IKE Policy

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual

To add or edit an IKE policy, see “Manually Adding or Editing an IKE Policy on this page.

Note: You cannot delete or edit an IKE policy for which the VPN policy is active. You first must disable or delete the VPN policy before you can delete or edit the IKE policy.

Note: To gain a more complete understanding of the encryption, authentication and DH algorithm technologies, see the link to “Virtual Private Networking Basics” in Appendix E.

Manually Adding or Editing an IKE Policy

To manually add an IKE policy:

1.Select VPN > IPSec VPN from the menu. The IPsec VPN submenu tabs appear with the IKE Policies screen in view (see Figure 7-20 on page 7-23).

2.Under the List of IKE Policies table, click the add table button. The Add IKE Policy screen displays (see Figure 7-21 on page 7-25, which shows the UTM25 screen). The WAN1 and WAN2 radio buttons (next to Select Local Gateway) are shown on the Add IKE Policy screen for the UTM25 but not on the Add IKE Policy screen for the UTM10.

7-24 Virtual Private Networking Using IPsec Connections

v1.0, September 2009