NETGEAR UTM25-100NAS, UTM10EW-100NAS, UTM25EW-100NAS Viewing Attached Devices and the Dhcp Log

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual

The Connection Status screen displays the information that is described in Table 11-14.

Table 11-14. WAN1 (UTM25) or WAN (UTM10) Port Status Informations

Item	Description (or Subfield and Description)
Connection Time	The period that the UTM has been connected through the WAN port.
Connection Type	DHCP or Static IP.
Connection Status	Connected or Disconnected.
IP Address	The addresses that were automatically detected (see “Automatically Detecting
Subnet Mask
	and Connecting” on page 3-2) or that you configured on the WAN1 ISP Settings
Gateway	screen (UTM25) or WAN ISP Settings screen (UTM10) (see “Manually
	Configuring the Internet Connection” on page 3-5).
DNS Server
DHCP Server	The DHCP server that was automatically detected (see “Automatically Detecting
	and Connecting” on page 3-2) or that you configured for a VLAN profile on the
	Edit VLAN Profile screen (see “Configuring a VLAN Profile” on page 4-6).
Lease Obtained	The time when the DHCP lease was obtained.
Lease Duration	The period that the DHCP lease remains in effect.

Depending on the type of connections, any of the following buttons may be displayed on the Connection Status screen:

•renew. Click to renew the DHCP lease.

•release. Click to disconnect the DHCP connection.

•disconnect. Click to disconnect the static IP connection.

For the UTM25 only, the procedure to view the status of the WAN2 port is identical to the one for the WAN1 port with the exception that you must select the WAN2 ISP Settings submenu tab to display the WAN2 ISP Setting screen.

Viewing Attached Devices and the DHCP Log

The LAN Groups screen contains a table of all IP devices that the UTM has discovered on the local network. The LAN Setup screen lets you access the DHCP log.

Viewing Attached Devices

To view the attached devices in the LAN Groups screen:

1.Select Network Config > LAN Settings from the menu. The LAN Settings submenu tabs appear, with the LAN Setup screen in view (see Figure 11-20 on page 11-30, which contains some profiles in the VLAN Profiles table as an example).

Monitoring System Access and Performance 11-29

v1.0, September 2009