NETGEAR UTM10EW-100NAS manual RIP Configuration Settings, Out Only, Authentication for RIP-2B/2M

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual

Table 4-5. RIP Configuration Settings

Setting	Description (or Subfield and Description)
RIP
RIP Direction	From the RIP Direction pull-down menu, select the direction in which the UTM
	sends and receives RIP packets:
	• None. The neither advertises its route table nor does it accept any RIP
	packets from other routers. This effectively disables RIP.
	• In Only. The accepts RIP information from other routers but does not
	advertises its routing table.
	• Out Only. The	advertises its routing table but does not accept RIP
	information from other routers.
	• Both. The advertises its routing table and also processes RIP information
	received from other routers.
RIP Version	From the RIP Version pull-down menu, select the version:
	• RIP-1. Classful routing that does not include subnet information. This is the
	most commonly supported version.
	• RIP-2. Routing that supports subnet information. Both RIP-2B and RIP-2M
	send the routing data in RIP-2 format:
	– RIP-2B. Sends the routing data in RIP-2 format and uses subnet
	broadcasting.
	– RIP-2M. Sends the routing data in RIP-2 format and uses multicasting.
Authentication for RIP-2B/2M
Authentication for	Authentication for RP-2B or RIP-2M is disabled by default, that is, the No radio
RIP-2B/2M required?	button is selected. To enable authentication for RP-2B or RIP-2M, select the
	Yes radio button and enter the settings for the fields below.
	First Key Parameters
	MD5 Key Id		The identifier for the key that is used for authentication.
	MD5 Auth Key		The password that is used for MD5 authentication.
	Not Valid Before		The beginning of the lifetime of the MD5 key. Enter the
			month, date, year, hour, minute, and second. Before this
			date and time, the MD5 key is not valid.
	Not Valid After		The end of the lifetime of the MD5 key. Enter the month,
			date, year, hour, minute, and second. After this date and
			time, the MD5 key is no longer valid.
	Second Key Parameters
	MD5 Key Id		The identifier for the key that is used for authentication.
	MD5 Auth Key		The password that is used for MD5 authentication.

4-26 LAN Configuration

v1.0, September 2009