NETGEAR UTM25-100NAS, UTM10EW-100NAS, UTM25EW-100NAS manual Package Contents, Hardware Features

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual

Package Contents

The UTM product package contains the following items:

•ProSecure Unified Threat Management Appliance UTM10 or UTM25.

•One AC power cable.

•Rubber feet (4).

•One rack-mounting kit (UTM25 only).

•ProSecure Unified Threat Management UTM10 or UTM25 Installation Guide.

•Resource CD, including:

–Application Notes and other helpful information.

–ProSafe VPN Client Software (VPN01L)

•Service Registration Card with License Key(s).

•Warranty and Support Information Card.

If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the carton, including the original packing materials, in case you need to return the product for repair.

Hardware Features

The front panel ports and LEDs, rear panel ports, and bottom label of the UTM are described below.

Front Panel

Viewed from left to right, the UTM front panel contains the following ports (see Figure 1-2 on page 1-10, which shows the UTM25):

•One non-functioning USB port: this port is included for future management enhancements. The port is currently not operable on the UTM.

•LAN Ethernet ports: four switched N-way automatic speed negotiating, Auto MDI/MDIX, Gigabit Ethernet ports with RJ-45 connectors.

•WAN Ethernet ports: one (UTM10) or two (UTM25) independent N-way automatic speed negotiating, Auto MDI/MDIX, Gigabit Ethernet ports with RJ-45 connectors.

Introduction 1-9

v1.0, September 2009