NETGEAR UTM25EW-100NAS, UTM25-100NAS SSL VPN Wizard Client IP Address Range and Routes Settings

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual

Table 8-4. SSL VPN Wizard Step 4: Client IP Address Range and Routes Settings

Item	Description (or Subfield and Description)
Client IP Address Range
Enable Full Tunnel Support	Select this checkbox to enable full tunnel support. If you leave this
	checkbox deselected (which is the default setting), split tunnel support is
	enabled, and you must add a client route by completing the Destination
	Network and Subnet Mask fields.
	Note: When full tunnel support is enabled, client routes are not operable.
DNS Suffix	A DNS suffix to be appended to incomplete DNS search strings. This is
	an option.
Primary DNS Server	The IP address of the primary DNS server that is assigned to the VPN
	tunnel clients. This is an option.
	Note: If you do not assign a DNS server, the DNS settings remain
	unchanged in the VPN client after a VPN tunnel has been established.
Secondary DNS Server	The IP address of the secondary DNS server that is assigned to the VPN
	tunnel clients. This is an option.
Client Address Range Begin	The first IP address of the IP address range that you want to assign to
	the VPN tunnel clients.
Client Address Range End	The last IP address of the IP address range that you want to assign to
	the VPN tunnel clients.
Add Routes for VPN Tunnel Clients
Destination Network	Leave this field blank or specify a destination network IP address of a
	local network or subnet that has not yet been used.
Subnet Mask	Leave this field blank to specify the address of the appropriate subnet
	mask.

8-10 Virtual Private Networking Using SSL Connections

v1.0, September 2009