NETGEAR UTM25EW-100NAS, UTM25-100NAS manual QoS Profile Settings, Default High Medium High Low

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual

Note: This document assumes that you are familiar with QoS concepts such QoS priority queues, IP Precedence, DHCP, and their values.

Table 5-7. QoS Profile Settings

Setting	Description (or Subfield and Description)
Profile Name	A descriptive name of the QoS profile for identification and management purposes.
Don't Change	Select the Don’t Change radio button to ignore the QoS type (IP Precedence or
	DHCP) and QoS value and to set only the QoS priority.
Add DiffServ Mark	Select the Add DiffServ Mark radio button to set the differentiated services
	(DiffServ) mark in the Type of Service (ToS) byte of an IP header by specifying the
	QoS type (IP Precedence or DHCP) and QoS value.
	QoS (Type)		From the QoS pull-down menu, select one of the following traffic
			classification methods:
			• IP Precedence. A legacy method that sets the priority in the ToS
			byte of an IP header.
			• DSCP. A method that sets the Differentiated Services Code Point
			(DSCP) in the Differentiated Services (DS) field (which is the
			same as the ToS byte) of an IP header.
	QoS Value		The QoS value in the ToS or Diffserv byte of an IP header. The QoS
			value that you enter depends on your selection from the QoS pull-
			down menu:
			• For IP Precedence, select a value from 0 to 7.
			• For DSCP, select a value from 0 to 63.
QoS Priority	From the QoS Priority pull-down menu, select one of the following priority queues:
	•	Default.
	•	High.
	•	Medium High.
	•	Medium.
	•	Low.

5.Click Apply to save your settings. The new QoS profile is added to the List of QoS Profiles table.

To edit a QoS profile:

1.In the List of QoS Profiles table, click the edit table button to the right of the QoS profile that you want to edit. The Edit QoS Profile screen displays.

2.Modify the settings that you wish to change (see Table 5-7).

Firewall Protection 5-35

v1.0, September 2009