ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual

Table 2-2. Setup Wizard Step 2: WAN Settings (continued)

Setting

Description (or Subfield and Description)

 

 

 

Use These DNS

If your ISP has assigned DNS addresses, select the Use these DNS Servers radio

Servers

button. Ensure that you fill in valid DNS server IP addresses in the fields. Incorrect

 

DNS entries might cause connectivity issues.

 

 

 

 

Primary DNS Server

The IP address of the primary DNS server.

 

 

 

 

Secondary DNS Serve

The IP address of the secondary DNS server.

 

 

 

Setup Wizard Step 3 of 10: System Date and Time

Figure 2-9

Enter the settings as explained in Table 2-3 on page 2-15, then click Next to go the following screen.

Note: After you have completed the steps in the Setup Wizard, you can make changes to the date and time by selecting Administration > System Date & Time. For more information about these settings, see “Configuring Date and Time Service” on page 10-24.

2-14

Using the Setup Wizard to Provision the UTM in Your Network

v1.0, September 2009

Page 46
Image 46
NETGEAR UTM10EW-100NAS, UTM25-100NAS, UTM25EW-100NAS manual Setup Wizard of 10 System Date and Time