Figure B-15 | NETGEAR UTM25EW-100NAS, UTM25-100NAS, UTM10EW-100NAS

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual

After a rollover of a gateway WAN port, the previously inactive gateway WAN port becomes the active port (port WAN_A2 in Figure B-15) and one of the gateways must re-establish the VPN tunnel.

Figure B-15

The purpose of the FQDNs is to toggle the domain name of the rolled-over gateway between the IP addresses of the active WAN port (that is, WAN_A1 and WAN_A2 in Figure B-15) so that the other end of the tunnel has a known gateway IP address to establish or re-establish a VPN tunnel.

VPN Gateway-to-Gateway: Dual Gateway WAN Ports for Load Balancing

In a configuration with two dual-WAN port VPN gateways that function in load balancing mode, either of the gateway WAN ports at one end can be programmed in advance to initiate the VPN tunnel with the appropriate gateway WAN port at the other end as necessary to manage the loads of the gateway WAN ports because the IP addresses of the WAN ports are known in advance.

Figure B-16

The IP addresses of the gateway WAN ports can be either fixed or dynamic. If an IP address is dynamic, you must use a FQDN. If an IP address is fixed, an FQDN is optional.

Network Planning for Dual WAN Ports (UTM25 Only)

B-15

v1.0, September 2009

Image 437

NETGEAR UTM25EW-100NAS, UTM25-100NAS, UTM10EW-100NAS manual Figure B-15

Contents

NETGEAR, Inc Statement of Conditions TrademarksEU Regulatory Compliance Statement Bestätigung des Herstellers/Importeurs Additional Copyrights Voluntary Control Council for Interference Vcci StatementAES Terms MD5 Model Number Product and Publication DetailsPublication Date September Product Family Product Name V1.0, September Contents Classical Routing UTM10 and UTM25 Configuring Secondary WAN Addresses Chapter LAN Configuration Chapter Content Filtering and Optimizing Scans Chapter Virtual Private Networking Using SSL Connections Features That Increase Traffic Features That Reduce TrafficUsing QoS and Bandwidth Assignment to Shift the Traffic Mix Changing Passwords and Administrator Settings Configuring the E-mail Notification Server Configuring Logging, Alerts, and Event NotificationsConfiguring and Activating System, E-mail, and Syslog Logs Configuring and Activating Firewall Logs Testing the Path from Your PC to a Remote Device Testing the LAN Path to Your UTMRestoring the Default Configuration and Password Problems with Date and Time Appendix D Two Factor Authentication Xvi Conventions, Formats, and Scope About This Manual Revision History How to Print This Manual Chapter Introduction Key Features and Capabilities Advanced VPN Support for Both IPsec and SSL Stream Scanning for Content Filtering Powerful, True Firewall Autosensing Ethernet Connections with Auto Uplink Security Features Extensive Protocol Support Easy Installation and Management Maintenance and Support Service Registration Card with License Keys Hardware Features Package Contents USB port Left LAN LEDs Power LEDActive Right WAN LEDs LEDs WAN Ports Object Activity Description LAN PortsDMZ LED Rear Panel Security lock Console port Reset button AC power ReceptacleBottom Panel With Product Label Receptacle 4shows the product label for the UTM10 Choosing a Location for the UTM Using the Rack-Mounting Kit Understanding the Steps for Initial Connection Using the Setup Wizard to Provision the UTM in Your Network Qualified Web Browsers Logging In to the UTM V1.0, September V1.0, September Understanding the Web Management Interface Menu Layout V1.0, September Using the Setup Wizard to Perform the Initial Configuration Setup Wizard of 10 LAN Settings Dhcp Setup Wizard LAN Settings Setting Description or Subfield and Description Setting Description or Subfield and Description DNS Proxy Setup Wizard of 10 WAN Settings ISP Type Setup Wizard WAN SettingsSetting Description or Subfield and Description ISP Login ISP Internet IP AddressDomain Name Server DNS Servers Get Automatically from ISP radio button Setup Wizard of 10 System Date and Time Adjust for Daylight Savings Time checkbox Setup Wizard System Date and Time Settings Setup Wizard of 10 Security Services Web Setup Wizard Security Services SettingsInstant Messaging Peer-to-Peer P2P Setting Description or Subfield and Description Action Setup Wizard of 10 Email SecuritySetup Wizard Email Security Settings Scan Exceptions Setup Wizard of 10 Web Security See Performance Management on Setup Wizard Web Security Settings Setup Wizard of 10 Web Categories to Be Blocked Blocked Categories Time of Day Setup Wizard Content Filtering SettingsBlocked Categories Scheduled Days Administrator Email Notification Settings Setup Wizard Administrator Email Notification Settings Setup Wizard of 10 Security Subscription Update Settings Update Settings Setup Wizard Security Subscription Update SettingsUpdate Frequency Https Proxy Settings Setup Wizard of 10 Saving the Configuration Verifying Proper InstallationTesting Connectivity Testing Http Scanning Registering the UTM with Netgear Click Register What to Do Next V1.0, September Understanding the Internet and WAN Configuration Tasks Manually Configuring Internet and WAN Settings Automatically Detecting and Connecting Configuring the Internet Connections V1.0, September Pptp Internet connection methodsConnection Method Data Required Manually Configuring the Internet Connection Setting the UTM’s MAC Address V1.0, September Pptp and PPPoE Settings Internet IP Address Settings DNS Server Settings Classical Routing UTM10 and UTM25 Network Address Translation UTM10 and UTM25 Configuring Auto-Rollover Mode UTM25 Only Setting Description or Subfield and Description Port Mode Auto-Rollover Mode Settings UTM25 Only WAN2 Configuring the Internet Connections onWAN1 V1.0, September Using the Services menu see Services-Based Rules on Protocol Binding Settings UTM25 Only Destination Configuring Secondary WAN Addresses V1.0, September Select Network Config Dynamic DNS from the menu Configuring Dynamic DNS V1.0, September WAN2 Dynamic DNS Status DNS Service Settings Configuring Advanced WAN Options Setting Description or Subfield and Description MTU Size Advanced WAN SettingsUse Default Address radio button Port Speed Upload/Download Settings Additional WAN-Related Configuration Tasks Managing Virtual LANs and Dhcp Options Chapter LAN Configuration Managing the UTM’s Port-Based VLANs V1.0, September Dhcp Server Vlan Dhcp Options DNS Proxy Dhcp Relay Edit Add Configuring a Vlan ProfileLdap Server V1.0, September Vlan ID Vlan Profile SettingsPort Membership Vlan Address Contiguous addresses in the IP address pool. Any Settings below Configuring Multi-Home LAN IPs on the Default Vlan Managing Groups and Hosts LAN Groups Managing the Network Database V1.0, September Adding PCs or Devices to the Network Database Add Known PCs and Devices SettingsSetting Up Address Reservation on Editing PCs or Devices in the Network Database Changing Group Names in the Network Database Setting Up Address Reservation Configuring and Enabling the DMZ Port V1.0, September DMZ Setup Settings Own LAN IP address as the primary DNS server IP address Managing Routing Configuring Static Routes Static Route Settings Configuring Routing Information Protocol RIP Select Network Configuration Routing from the menu Out Only . RIP Configuration SettingsAuthentication for RIP-2B/2M Static Route Example V1.0, September About Firewall Protection Chapter Firewall Protection Administrator Tips Number of Supported Firewall Rule Configurations Using Rules to Block or Allow Specific Kinds of TrafficServices-Based Rules Outbound Rules Service Blocking Outbound Rules Overview Customized Services onTo Block or Allow Specific Traffic on Hosts LAN Groups on NAT IP Inbound Rules Port Forwarding V1.0, September Inbound Rules Overview By this rule. The options are Order of Precedence for Rules Setting LAN WAN Rules LAN WAN Outbound Services Rules LAN WAN Inbound Services Rules Setting DMZ WAN Rules V1.0, September DMZ WAN Outbound Services Rules DMZ WAN Inbound Services Rules Setting LAN DMZ Rules LAN DMZ Outbound Services Rules Attack Checks LAN DMZ Inbound Services Rules Attack Checks Settings L2TP VPN Pass through Setting Session Limits Managing the Application Level Gateway for SIP Sessions Session Limit SettingsSession Timeout LAN WAN Inbound Rule Hosting a Local Public Web Server Inbound Rules Examples V1.0, September V1.0, September LAN WAN or DMZ WAN Inbound Rule Specifying an Exposed Host LAN WAN Outbound Rule Blocking Instant Messenger Outbound Rules Example Adding Customized Services Creating Services, QoS Profiles, and Bandwidth Profiles V1.0, September TCP Services Settings Creating Quality of Service QoS Profiles V1.0, September Default High Medium High Low QoS Profile Settings Creating Bandwidth Profiles V1.0, September Bandwidth Profile Settings Setting a Schedule to Block or Allow Specific Traffic Enabling Source MAC Filtering V1.0, September Setting up IP/MAC Bindings IP/MAC Bindings IP/MAC Binding SettingsEvent Notifications on Configuring Port Triggering V1.0, September 10. Port Triggering Settings Using the Intrusion Prevention System V1.0, September V1.0, September Misc 11. IPS Less Familiar Attack NamesAttack Name Description or Subfield and Description Web About Content Filtering and Scans Content Filtering and Optimizing Scans Default E-mail and Web Scan Settings Default E-mail and Web Scan Settings Scan Type Default Scan Setting Default Action if applicable Configuring E-mail Protection Customizing E-mail Protocol Scan Settings Customizing E-mail Anti-Virus and Notification Settings Performance see Performance Management on E-mail Anti-Virus and Notification SettingsNotification Settings Mail Email Alert Settings FILENAME%, %ACTION%, %VIRUSNAME% Mail Content FilteringTIME%, %PROTOCOL%, %FROM%, %TO%, %SUBJECT% V1.0, September Filter by Password-Protected Attachments ZIP, RAR, etc E-mail Filter Settings Protecting Against E-mail Spam Password-Protected Attachments ZIP, RAR, etc. section aboveFilter by File Name Protected Attachments ZIP, RAR, etc. section above Setting Up the Whitelist and Blacklist V1.0, September Whitelist/Blacklist Settings Configuring the Real-time Blacklist V1.0, September Configuring Distributed Spam Analysis Distributed Spam Analysis Settings Block spam email Anti-Spam Engine SettingsLow Medium-Low Customizing Web Protocol Scan Settings and Services Configuring Web and Services Protection Setting Description or Subfield and Description Web Web Protocol, Instant Messaging, and Peer-to-Peer Settings Configuring Web Malware Scans Malware Scan Settings Html Scan Configuring Web Content Filtering V1.0, September Content Filtering, screen 1 10 Content Filtering, screen 2 11 Content Filtering, screen 3 Performance Management on Content Filtering SettingsFull-Text Search Block Web Objects Blocked Categories Scheduled Days Netgear Configuring Web URL FilteringURL V1.0, September Blacklist URL Filtering SettingsSetting Description or Subfield and Description Whitelist URL% Https Scan Settings V1.0, September V1.0, September Specifying Trusted Hosts 10. Https Settings 11. Trusted Hosts Settings Hosts Configuring FTP Scans 12. FTP Scan Settings Block Files with the Following Extensions Setting Web Access Exceptions and Scanning ExclusionsSetting Web Access Exception Rules To set Web access exception rules Groups and Hosts LAN Groups on 13. Add and Edit Block Scanning Exception Settings Setting Scanning Exclusions 14. Add Scanning Exclusion Settings V1.0, September Considerations for Dual WAN Port Systems UTM25 Only Chapter Virtual Private Networking Using IPsec Connections IP Addressing for VPNs in Dual WAN Port Systems Creating Gateway-to-Gateway VPN Tunnels with the Wizard V1.0, September Connection Name and Remote IP Type IPsec VPN Wizard Settings for a Gateway-to-Gateway Tunnel End Point Information a Secure Connection Remote AccessibilityAdding or Editing a VPN Policy on V1.0, September Creating a Client to Gateway VPN Tunnel V1.0, September Fqdn IPsec VPN Wizard Settings for a Client-to-Gateway Tunnel V1.0, September V1.0, September Only Connect Manually checkbox Security Policy Editor Remote Party SettingsGateway Tunnel Status on Security Policy Editor My Identity Settings On page 7-9. In this example, the domain name is Testing the VPN Connection Testing the Connections and Viewing Status InformationSecurity Policy Editor Security Policy Settings Detection checkbox Netgear VPN Client Status and Log Information V1.0, September System Tray Icon Status Client policy is deactivated Viewing the UTM IPsec VPN Connection Status IPsec VPN Connection Status Information Viewing the UTM IPsec VPN Log Managing IPsec VPN Policies IKE Policies Screen Managing IKE Policies List of IKE Policies Information Manually Adding or Editing an IKE Policy V1.0, September General 10. Add IKE Policy SettingsMode Config Record IKE SA Parameters LocalRemote Group 1 768 bit Configuring KeepalivesGroup 5 1536 bit Dead Peer Extended Authentication VPN Policies Screen Managing VPN Policies Remote 11. List of VPN Policies Information Manually Adding or Editing a VPN Policy V1.0, September 12. Add VPN Policy Settings Manual Policy Parameters Description or Subfield and Description Traffic Selection Auto Policy Parameters Group 1536 bit Configuring Extended Authentication XauthGroup 768 bit Configuring Xauth for VPN Clients Information, see Radius Client Configuration on User Database ConfigurationRadius Client Configuration V1.0, September Backup Radius Server 14. Radius Client SettingsConnection Configuration Primary Radius Server Configuring Mode Config Operation on the UTM Assigning IP Addresses to Remote Users Mode ConfigMode Config Operation V1.0, September Client Pool 15. Add Mode Config Record Settings Traffic Tunnel Security Level V1.0, September 16. Add IKE Policy Settings for a Mode Config Configuration Menu, select Group 2 1024 bit ConfiguringKeepalives and Dead Peer Detection on Configuring the ProSafe VPN Client for Mode Config Operation 192.168.1.0 Gateway Tunnel 18. Security Policy Editor My Identity, Mode Config Settings Menu Testing the Mode Config Connection Configuring Keepalives and Dead Peer Detection Configuring Keepalives 20. Keepalive Settings Configuring Dead Peer Connection 21. Dead Peer Detection Settings Configuring NetBIOS Bridging with IPsec VPN Understanding the SSL VPN Portal Options Chapter Virtual Private Networking Using SSL Connections Using the SSL VPN Wizard for Client Configurations SSL VPN Wizard of 6 Portal Settings Screen as shown in -8 on SSL VPN Wizard Portal SettingsPortal Layout and Theme Name SSL VPN Portal Pages to Display SSL VPN Wizard of 6 Domain Settings Radius Client SSL VPN Wizard Domain SettingsDomain Name SSL VPN Wizard of 6 User Settings SSL VPN Wizard User Settings SSL VPN Wizard of 6 Client IP Address Range and Routes Add Routes for VPN Tunnel Clients SSL VPN Wizard Client IP Address Range and Routes SettingsClient IP Address Range SSL VPN Wizard of 6 Port Forwarding SSL VPN Wizard Port Forwarding Settings Add New Host Name for Port Forwarding SSH SSL VPN Wizard of 6 Verify and Save Your Settings Accessing the New SSL Portal Login Screen V1.0, September Viewing the UTM SSL VPN Log Viewing the UTM SSL VPN Connection Status Manually Configuring and Editing SSL Connections Creating the Portal Layout V1.0, September V1.0, September Add Portal Layout Settings Configuring Applications for Port Forwarding Configuring Domains, Groups, and Users Adding Servers and Port Numbers TCP Application Port Number Adding a New Host NamePort Forwarding Applications/TCP Port Numbers Fully Qualified Domain Name. The full server name Configuring the SSL VPN Client Configuring the Client IP Address Range Tunnel Clients on Adding Routes for VPN Tunnel Clients Using Network Resource Objects to Simplify Policies Adding New Network Resources Editing Network Resources to Specify Addresses Add Resource Addresses Settings Configuring User, Group, and Global Policies Viewing Policies Adding a Policy Policy For 10. Add Policy Settings Network Resource Objects to Simplify Policies on Description or Subfield and Description Add SSL VPN Policies 10. Add Policy Settings V1.0, September V1.0, September Configuring VPN Authentication Domains, Groups, and Users Managing Users, Authentication, and Certificates Authentication Protocols and Methods Configuring Domains Ldap Add Domain Settings Creating the Portal Layout on Configuring Groups for VPN Policies Creating and Deleting Groups Editing Groups VPN Group Settings Configuring User Accounts V1.0, September Policies on Add User SettingsSee Configuring Extended Authentication Xauth on Configuring Login Policies Setting User Login Policies Configuring Login Restrictions Based on IP Address Add Defined Addresses Settings Configuring Login Restrictions Based on Web Browser Internet Explorer Opera Netscape Navigator Changing Passwords and Other User Settings Managing Digital Certificates Edit User SettingsEnabled see Configuring Extended Authentication Xauth on V1.0, September 11 Certificates, screen 1 Managing CA Certificates Managing Self Certificates Generating a CSR and Obtaining a Self Certificate from a CA 13 Certificates, screen 2 Setting 512 1024 2048 V1.0, September Viewing and Managing Self Certificates Managing the Certificate Revocation List 15Certificates, screen 3 Bandwidth Capacity Performance Management Features That Reduce Traffic Network and System Management 10-3 Content Filtering Source MAC Filtering Features That Increase Traffic 10-6 Network and System Management Port Triggering Configuring the DMZ Port Configuring Exposed Hosts Using QoS and Bandwidth Assignment to Shift the Traffic MixConfiguring VPN Tunnels Assigning QoS Profiles System Management Changing Passwords and Administrator SettingsMonitoring Tools for Traffic Management Assigning Bandwidth Profiles 10-10 Network and System Management Network and System Management 10-11 Configuring Remote Management Access Https//IPaddress or https//FullyQualifiedDomainName Using an Snmp Manager Snmp Settings Managing the Configuration FileSetting Description or Subfield and Description Settings Trusted Snmp Hosts Backup Settings Restore Settings Updating the Firmware Reverting to Factory Default Settings Viewing the Available Firmware Versions Upgrading the Firmware and Rebooting the UTM Updating the Scan Signatures and Scan Engine Firmware Rebooting Without Changing the Firmware 10-22 Network and System Management Signatures & Scan Engine Settings Configuring Automatic Update and Frequency Settings System Date & Time Settings Configuring Date and Time Service Network and System Management 10-25 10-26 Network and System Management Enabling the WAN Traffic Meter Monitoring System Access and Performance 11-2 Monitoring System Access and Performance Logging, Alerts, and Event Notifications on WAN Traffic Meter SettingsTraffic Counter Mail, and Syslog Logs on Configuring the E-mail Notification Server Configuring Logging, Alerts, and Event Notifications Server requires authentication checkbox and enter Configuring and Activating System, E-mail, and Syslog LogsE-mail Notification Settings Monitoring System Access and Performance 11-7 Email Logs to Administrator E-mail and Syslog Settings Send Logs via Syslog Configuring and Activating Update Failure and Attack Alerts Alerts Settings ACTION%, %VIRUSNAME% PROTOCOL%, %FROM%, %TO%, %SUBJECT%, %FILENAME% Configuring and Activating Firewall Logs Monitoring Real-Time Traffic, Security, and Statistics Firewall Logs Settings Dashboard, screen 1 Spam to configure, see Protecting Against E-mail Spam on Settings onTotal Threats System on Total Traffic Bytes Threats Counts Dashboard Most Recent 5 and Top 5 Information Categories, see Using the IntrusionCategory Most Recent 5 Description Top 5 Description Prevention System on Dashboard, screen 3 Dashboard Service Statistics Information Viewing System Status Viewing Status Screens System Status Status and System Information Setting Status 11 System Status, screen 2 Dhcp NATLAN Port 11. System Status Interface Statistics Viewing Active VPN UsersViewing VPN Tunnel Connection Status 12. IPsec VPN Connection Status Information Viewing Port Triggering Status To view the status of the Port Triggering feature 13. Port Triggering Status Information Viewing the WAN Ports Status 11-28 Monitoring System Access and Performance Edit Vlan Profile screen see Configuring a Vlan Profile on Configuring the Internet Connection onViewing Attached Devices and the Dhcp Log Viewing Attached Devices 11-30 Monitoring System Access and Performance Viewing the Dhcp Log Querying the Logs Querying Logs and Generating Reports Monitoring System Access and Performance 11-33 15. Logs Query Settings Following protocols can be selected See Configuring and Activating Firewall Logs onThis field is available for the following logs Following reasons can be selected Following categories can be selectedThis field is available only for the Spam log This field is available only for the Malware log This field is available only for the Content filters log EMERG, ALERT, CRITICAL, ERROR, WARNING, NoticeThis field is available only for the Service log Log Management Example Using Logs to Identify Infected Clients Scheduling and Generating Reports Generating Reports Email Reports 16. Generate Report SettingsWeb Reports System Reports Scheduling Reports 17. Schedule Report Settings Report List Using Diagnostics UtilitiesEmail Reports Web Reports System Reports Sending a Ping Packet Using the Network Diagnostic Tools Looking up a DNS Address Tracing a RouteDisplaying the Routing Table 27 Diagnostics, screen 2 Using the Realtime Traffic Diagnostics Tool Generating Network Statistics Gathering Important Log Information Rebooting and Shutting Down the UTM Troubleshooting and Using Online Support Test LED Never Turns Off Power LED Not OnBasic Functioning LAN or WAN Port LEDs Not On Troubleshooting the Web Management Interface When You Enter a URL or IP Address a Time-out Error Occurs Troubleshooting the ISP Connection Troubleshooting a TCP/IP Network Using a Ping Utility Testing the Path from Your PC to a Remote Device Testing the LAN Path to Your UTM Restoring the Default Configuration and Password Problems with Date and Time Enabling Remote Troubleshooting Using Online Support Sending Suspicious Files to Netgear for Analysis Malware Analysis Settings Accessing the Knowledge Base and Documentation Feature Default behavior Router Login Table A-1. UTM Default Configuration SettingsInternet Connection Local Network LAN Table A-2. UTM Physical and Technical Specifications Feature Specification Environmental Specifications Table A-3. UTM IPsec VPN SpecificationsInterface Specifications Setting Specification MD5, SHA-1, MAC-MD5/SHA-1, HMAC-MD5/SHA-1 Table A-4. UTM SSL VPN Specifications What to Consider Before You Begin Appendix B Network Planning for Dual WAN Ports UTM25 Only Internet WAN port Physical facility Cabling and Computer Hardware Requirements Computer Network Configuration RequirementsInternet Configuration Requirements Internet Connection Information Where Do I Get The Internet Configuration Information? Overview of the Planning Process Figure B-2 Inbound Traffic to a Single WAN Port System Inbound Traffic Inbound Traffic Dual WAN Ports for Load Balancing Inbound Traffic to a Dual WAN Port SystemInbound Traffic Dual WAN Ports for Improved Reliability VPN Road Warrior Client Virtual Private Networks VPNsTo-Gateway To-Gateway Through a NAT Figure B-7 VPN Road Warrior Single Gateway WAN Port Reference Case VPN Road Warrior Client-to-Gateway Figure B-10 VPN Road Warrior Dual Gateway WAN Ports for Load Balancing VPN Gateway-to-Gateway Figure B-13 Figure B-15 VPN Telecommuter Single Gateway WAN Port Reference Case VPN Telecommuter Client-to-Gateway Through a NAT Router Figure B-18 Figure B-20 VPN Telecommuter Dual Gateway WAN Ports for Load Balancing Term Description or Subfield and Description Table C-1. Log Message Terms Table C-3. System Logs Reboot RebootSystem Log Messages System Startup Table C-5. System Logs NTP Service LogsTable C-4. System Logs Service IPsec Restart Login/LogoutFirewall Restart WAN Status Auto-Rollover ModeSystem Logs WAN Status, Auto Rollover ACTIVEWAN2 Table C-9. System Logs WAN Status, Load Balancing Load-Balancing Mode PPP Logs Table C-10. System Logs WAN Status, PPPoE Idle-Timeout Table C-12. System Logs WAN Status, PPP Authentication Table C-11. System Logs WAN Status, Pptp Idle-Timeout Icmp Redirect Logs Traffic Metering LogsUnicast Logs Multicast/Broadcast Logs Invalid Packet LoggingTable C-16. System Logs Multicast/Broadcast Table C-17. System Logs Invalid Packets Invalidbadhwchecksumdrop SRC=192.168.20.10 Invalidbadchecksumdrop SRC=192.168.20.10Invalidmalformedpacketdrop SRC=192.168.20.10 Invalidshortpacketdrop SRC=192.168.20.10 Web Filtering and Content Filtering Logs Content Filtering and Security Logs Spam Logs Table C-19. Content Filtering and Security Logs Spam Table C-21. Content Filtering and Security Logs Virus Table C-20. Content Filtering and Security Logs TrafficTraffic Logs Virus Logs Table C-24. Content Filtering and Security Logs Port Scan Table C-23. Content Filtering and Security Logs IPSIPS Logs Port Scan Logs LAN to WAN Logs Routing LogsLAN to DMZ Logs DMZ to WAN Logs WAN to DMZ Logs WAN to LAN LogsDMZ to LAN Logs V1.0, September What are the benefits of Two-Factor Authentication? Why do I need Two-Factor Authentication? What is Two-Factor Authentication Netgear Two-Factor Authentication Solutions Figure D-1 Figure D-3 Document Link Appendix E Related Documents V1.0, September Numerics Index Index-2 Index-3 Index-4 Index-5 Index-6 Index-7 Index-8 Index-9 Index-10 Index-11 Index-12 Index-13 Index-14 Index-15 Index-16