NETGEAR UTM10EW-100NAS Verifying Proper Installation, Setup Wizard of 10 Saving the Configuration

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual

Setup Wizard Step 10 of 10: Saving the Configuration

Figure 2-16

Click Apply to save your settings and automatically restart the system.

Verifying Proper Installation

Test the UTM before deploying it in a live production environment. The following instructions walk you through a couple of quick tests that are designed to ensure that your UTM is functioning correctly.

Testing Connectivity

Verify that network traffic can pass through the UTM:

•Ping an Internet URL.

•Ping the IP address of a device on either side of the UTM.

Testing HTTP Scanning

If client computers have direct access to the Internet through your LAN, try to download the eicar.com test file from http://www.eicar.org/download/eicar.com.

The eicar.com test file is a legitimate DoS program and is safe to use because it is not a malware threat and does not include any fragments of malware code. The test file is provided by EICAR, an organization that unites efforts against computer crime, fraud, and misuse of computers or networks.

2-26 Using the Setup Wizard to Provision the UTM in Your Network

v1.0, September 2009