ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual

Note: For security reasons, the Deny Login from WAN Interface checkbox is selected by default for guests and administrators. The Disable Login checkbox is disabled (masked out) for administrators.

4.Click Apply to save your settings.

Configuring Login Restrictions Based on IP Address

To restrict logging in based on IP address:

1.Select Users > Users from the menu. The Users screen displays (see Figure 9-5 on page 9-10).

2.In the Action column of the List of Users table, click the policies table button for the user for which you want to set login policies. The Policies submenu tabs appear, with the Login Policies screen in view.

3.Click the by Source IP Address submenu tab. The by Source IP Address screen displays. Figure 9-8shows an IP address in the Defined Addresses table as an example.

Figure 9-8

Managing Users, Authentication, and Certificates

9-13

v1.0, September 2009

Page 319
Image 319
NETGEAR UTM10EW-100NAS, UTM25-100NAS, UTM25EW-100NAS manual Configuring Login Restrictions Based on IP Address