NETGEAR UTM25-100NAS, UTM10EW-100NAS, UTM25EW-100NAS manual V1.0, September

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual

•Web server PC on the UTM’s LAN

–LAN IP address: 192.168.1.2

–DMZ IP Address: 192.168.10.2

–Access to Web server is (simulated) public IP address: 10.1.0.52

Tip: If you arrange with your ISP to have more than one public IP address for your use, you can use the additional public IP addresses to map to servers on your LAN or DMZ. One of these public IP addresses is used as the primary IP address of the router that provides Internet access to your LAN PCs through NAT. The other addresses are available to map to your servers.

To configure the UTM for additional IP addresses:

1.Select Network Security > Firewall from the menu. The Firewall submenu tabs appear.

2.If your server is to be on your LAN, select the LAN WAN Rules submenu tab. (This is the screen we will use in this example).

If your server is to be on your DMZ, select DMZ WAN Rules submenu tab.

3.Click the add table button under the Inbound Services table. The Add LAN WAN Inbound Service screen displays.

Figure 5-16

Firewall Protection 5-27

v1.0, September 2009