NETGEAR UTM25-100NAS, UTM10EW-100NAS, UTM25EW-100NAS Port Triggering, Configuring the DMZ Port

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual

–Groups. The rule is applied to a group of PCs. (You can configure groups for LAN WAN outbound rules but not for DMZ WAN outbound rules.) The Known PCs and Devices table is an automatically-maintained list of all known PCs and network devices and is generally referred to as the Network Database, which is described in “Managing the Network Database” on page 4-13. PCs and network devices are entered into the Network Database by various methods that are described in “Managing Groups and Hosts (LAN Groups)” on page 4-12.

•WAN Users. You can specify which Internet locations are covered by an inbound rule, based on their IP address:

–Any. The rule applies to all Internet IP address.

–Single address. The rule applies to a single Internet IP address.

–Address range. The rule is applied to a range of Internet IP addresses.

•Schedule. You can configure three different schedules to specify when a rule is applied. Once a schedule is configured, it affects all rules that use this schedule. You specify the days of the week and time of day for each schedule. For more information, see “Setting a Schedule to Block or Allow Specific Traffic” on page 5-39.

•QoS Profile. You can define QoS profiles and then apply them to inbound rules to regulate the priority of traffic. To define QoS profiles, see “Creating Quality of Service (QoS) Profiles” on page 5-33.

•Bandwidth Profile. You can define bandwidth profiles and then apply them to inbound rules to limit traffic. To define bandwidth profiles, see “Creating Bandwidth Profiles” on page 5-36.

Port Triggering

Port triggering allows some applications running on a LAN network to be available to external applications that would otherwise be partially blocked by the firewall. Using this the port triggering feature requires that you know the port numbers used by the application. Without port triggering, the response from the external application would be treated as a new connection request rather than a response to a requests from the LAN network. As such, it would be handled in accordance with the inbound port forwarding rules, and most likely would be blocked.

For the procedure on how to configure port triggering, see “Configuring Port Triggering” on page 5-44.

Configuring the DMZ Port

The De-Militarized Zone (DMZ) is a network that, by default, has fewer firewall restrictions when compared to the LAN. The DMZ can be used to host servers (such as a Web server, FTP server, or e-mail server) and provide public access to them. The fourth LAN port on the UTM (the rightmost

Network and System Management 10-7

v1.0, September 2009