NETGEAR UTM25EW-100NAS, UTM25-100NAS, UTM10EW-100NAS DNS Service Settings, WAN2 Dynamic DNS Status

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual

4.Click the Information option arrow in the upper right corner of a DNS screen for registration information.

Figure 3-12:

5.Access the Web site of the DDNS service provider and register for an account (for example, for dyndns.org, go to http://www.dyndns.com/).

6.For each WAN port of the UTM25 or for the single WAN port of the UTM10, configure the DDNS service settings as explained in Table 3-7, which shows the settings for the UTM25. (The screen for the UTM10 shows settings for a single WAN port only.)

Table 3-7. DNS Service Settings

Setting	Description (or Subfield and Description)
WAN1 (Dynamic DNS Status: ...)
Change DNS to	Select the Yes radio button to enable the DDNS service. The service that displays on
(DynDNS, TZO,	screen depends on the submenu tab for the DDNS service provider that you have
or Oray)	selected. Enter the following settings:
	Host and Domain Name	The host and domain name for the DDNS service.
	User Name	The user name for DDNS server authentication.
	Password	The password that is used for DDNS server authentication.
	Use wildcards	If your DDNS provider allows the use of wild cards in
		resolving your URL, you may select the Use wildcards
		checkbox to activate this feature. For example, the
		wildcard feature causes *.yourhost.dyndns.org to be
		aliased to the same IP address as yourhost.dyndns.org.
	Update every 30 days	If your WAN IP address does not change often, you might
		need to force a periodic update to the DDNS service to
		prevent your account from expiring. If it appears, you can
		select the Update every 30 days checkbox to enable a
		periodic update.
WAN2 (Dynamic DNS Status: ...)

See the information for WAN 1 above about how to enter the settings. You can select different DDNS services for WAN 1 and WAN 2.

7.Click Apply to save your configuration.

Manually Configuring Internet and WAN Settings 3-21

v1.0, September 2009