NETGEAR UTM10EW-100NAS, UTM25-100NAS manual Setup Wizard Administrator Email Notification Settings

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual

Setup Wizard Step 8 of 10: Administrator Email Notification Settings

Figure 2-14

Enter the settings as explained in Table 2-8, then click Next to go the following screen.

Note: After you have completed the steps in the Setup Wizard, you can make changes to the administrator email notification settings by selecting Network Config > Email Notification. For more information about these settings, see

“Configuring the E-mail Notification Server” on page 11-5.

Table 2-8. Setup Wizard Step 8: Administrator Email Notification Settings

Setting

Description (or Subfield and Description)

Administrator Email Notification Settings

Show as mail sender	A descriptive name of the sender for e-mail identification purposes. For
	example, enter UTM_Notifications@netgear.com.
SMTP server	The IP address and port number or Internet name and port number of your
	ISP’s outgoing e-mail SMTP server. The default port number is 25.
	Note: If you leave this field blank, the UTM cannot send e-mail notifications.

Using the Setup Wizard to Provision the UTM in Your Network 2-23

v1.0, September 2009