NETGEAR UTM25EW-100NAS, UTM25-100NAS manual Configuring a Vlan Profile, Ldap Server, Edit Add

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual

LDAP Server

A Lightweight Directory Access Protocol (LDAP) server allows a user to query and modify directory services that run over TCP/IP. For example, clients can query email addresses, contact information, and other service information using an LDAP server. For each VLAN, you can specify an LDAP server and a search base that defines the location in the directory (that is, the directory tree) from which the LDAP search begins.

Configuring a VLAN Profile

For each VLAN on the UTM, you can configure its profile, port membership, LAN TCP/IP settings, DHCP options, and DNS server.

To add or edit a VLAN profile:

1.Select Network Config > LAN Settings from the menu. The LAN submenu tabs appear, with the LAN Setup screen in view (see Figure 4-2, which shows two VLAN profiles as an example).

Note: For information about how to manage VLANs, see “Managing the UTM’s Port-Based VLANs” on page 4-2. The information below describes how to configure a VLAN profile.

Edit

Add

Figure 4-2

4-6 LAN Configuration

v1.0, September 2009