DVD Video Operations
Setting up the screen size
Set up the screen size according to the optional rear monitor which is connected to this unit.
• The factory default setting is “Wide”.
●When watching through a wide type of the rear monitor (16:9)
Wide:
●When watching through a conventional type of the rear monitor (4:3)
Setting up the disc menu language
• The factory default setting is “English”.
Setting up the audio language
• The factory default setting is “English”.
English Owner’s manual
Pan Scan:
The leftmost and rightmost areas of the screen are cut off.
This function allows displaying the important part of image fully on the screen. In some cases, image is displayed while being panned (scrolled).
Letter Box:
A black zone is created in the top and bottom areas of the screen.
This method displays Cinema Scope and Vista Vision images without cutting them off by creating a black zone on the top and bottom gaps.
Setting up the angle mark display
You can set up so that the angle mark appears on scenes where the angles can be switched.
• The factory default setting is “OFF”.
Setting up the subtitle language
• The factory default setting is “English”.
•To turn off the subtitle, select the [Off] key.
Setting up the password for setting up of the parental level
• The factory default setting is “0000”.
•Input the old password, and touch the [ENT] key.
Input “4356” to reset password to “0000”.
•Input a new password, and touch the [ENT] key.
•Input the same new password again, and touch the [ENT] key.
Note:
•When a disc with view restrictions is inserted, you will be prompted to input a password. The disc will not be viewable until the correct password is entered.
