Clarion MAX685BT owner manual Adjusting the Tone, Adjusting the Balance/Fader

Audio Settings

Adjusting the Tone	Adjusting the TREBLE
	The treble gain and treble frequency (center
You can adjust the sound tone by performing the
	frequency) can be adjusted as follows.
following adjustments.

English

Note:

•These operations are disabled when the DZE (Digital Z-Enhancer) function is set to other than “OFF”.

Adjusting the BASS

The bass gain, bass frequency (center frequency) and bass Q can be adjusted as follows.

3-1. Touch the [TONE] key to display the TONE tab screen.

3-2. Touch the [BASS] key.

3-3. Touch the [[] or []] key for the desirable type to adjust to a desirable level.

GAIN: –6 to 8

•The factory default setting is “0”. FREQ: 50Hz, 80Hz, 120Hz

•The factory default setting is “50Hz”. Q: 1, 1.25, 1.5, 2

•The factory default setting is “1”.

Adjusting the MID

The middle gain, middle frequency (center frequency) and middle Q can be adjusted as follows.

3-1. Touch the [TONE] key to display the TONE tab screen.

3-2. Touch the [MID] key.

3-3. Touch the [[] or []] key for the desirable type to adjust to a desirable level.

GAIN: –6 to 6

•The factory default setting is “0”. FREQ: 700Hz, 1kHz, 2kHz

•The factory default setting is “1kHz”. Q: 1.5, 2

•The factory default setting is “2”.

3-1. Touch the [TONE] key to display the TONE tab screen.

3-2. Touch the [TREBLE] key.

3-3. Touch the [[] or []] key for the desirable type to adjust to a desirable level.

GAIN: –6 to 6

•The factory default setting is “0”. FREQ: 8kHz, 12kHz

•The factory default setting is “12kHz”.

Adjusting the Balance/Fader

3-1. Touch the [BAL/FAD] key to display the BAL/FAD tab screen.

3-2. Touch the [{] or [}] key to adjust to the fader level.

[{]:

Emphasizes the sound from the front speakers.

[}]:

Emphasizes the sound from the rear speakers.

Adjustment range: front 12 to rear 12

• The factory default setting is “0”.

3-3. Touch the [[] or []] key to adjust to the balance level.

[[]:

Emphasizes the sound from the left speakers.

[]]:

Emphasizes the sound from the right speakers.

Adjustment range: left 12 to right 12

• The factory default setting is “0”.

Adjusting the Non-Fader output volume

You can adjust the volume output from the unit's non-fader output terminal.

3-1. Touch the [OTHERS] key to display the OTHERS tab screen.

3-2. Touch the [–] or [+] key of the NON FADER VOL item to adjust to desirable level. Setting range: –6 to 6

• The factory default setting is “0”.

Owner’s manual

MAX685BT 59