The following table shows the settings for various presets:
| Subsonic |
|
|
|
|
|
|
| |
| Filter | EQ | EQ | Volume |
Preset | Frequency | Frequency | Level | Differential |
|
|
|
|
|
Movies | 24 Hz | 37 Hz | +4 dB | +8 dB |
R&B – Rock | 27 Hz | 52 Hz | +3 dB | +5 dB |
Jazz – Classical | 24 Hz | N/A | N/A | N/A |
(Reference) |
|
|
|
|
Games | 34 Hz | 62 | +4 dB | +4 dB |
|
|
|
|
|
RESTORE DEFAULTS – This feature allows you to restore default settings for your DPS subwoofer. By pressing the presets in EXACTLY the following order on the front panel display, the unit’s power light will blink three times indicating that you have restored defaults.
1.Movies
2.R&B – Rock
3.Jazz – Classical
4.Games
5.Games
6.Jazz – Classical
7.R&B – Rock
8.Movies
When you press the presets in the above order, the power light will blink three times indicating that you have restored defaults. The default preset is
Night Mode
Night mode limits the maximum output of the subwoofer for late night listening or to be more considerate of close neighbors. Press the NIGHT button to turn the night mode feature on or off. Engaging the night mode causes the LED lights to burn less brightly. Night mode does not universally diminish the volume, rather, on louder passages, the maximum output of the unit is limited. It may be that you will hear little or no difference in the output of the woofer when night mode is activated. However, when an explosion or other loud transient is played, you should notice less ouput.
VOLUME Control
This control allows you to balance the output from the subwoofer to the main speakers in your system. This control should be set to achieve similar volume level from between both the main speakers and subwoofer. When pressing volume up or down, the speed at which the power light blinks indicates subwoofer volume - the faster the blinking, the louder the unit plays. After the volume is changed (up or down), there will also be two sets of center LED blinks. Slower blinks represent tens and faster blinks represent ones. If the LED blinks three times, pauses, then blinks six times, this means that the volume is set at 36. The volume range is from 1 to 99.
.w w w . v e l o d y n e . c o m | DPS User’s Manual |
4 |
