English Owner’s manual
4. BASIC OPERATIONS
Note:
•Be sure to read this chapter referring to the chapter “3. CONTROLS” (page 8).
Turning On and Off the Power
CAUTION
CAUTION
When the unit is turned on, starting and stopping the engine with its volume raised to the maximum level may harm your hearings. Be careful about adjusting the volume.
Note:
•Start the engine before using this unit.
•Be careful about using this unit for a long time without running the engine. If you drain the car’s battery too far, you may not be able to start the engine and this can reduce the service life of the battery.
1.Start the engine. The power is supplied to this unit.
Engine ON position
2.Press the [SRC] button. The unit automatically memorizes its last operation mode and will automatically switch to display that mode.
3.To turn off the power, press and hold the [SRC] button for more than 1 second.
Adjusting the Volume
1.Press the
[+]: Increases the volume.
•The volume level indicated in the display is in a range from 0 (min.) to 33 (max.).
CAUTION
CAUTION
While driving, keep the volume level at which external sounds can be heard.
Opening the operation panel and adjusting the angle
Open the operation panel when inserting/ejecting a disc.
The angle of the operation panel can be adjusted depending on the mounting angle of the unit or light coming into the car.
CAUTION
CAUTION
•Do not move the operation panel forcibly or do not apply strong force to the operation panel.
•When the operation panel is operating, be careful not to get your hand or finger caught between the operation panel and main unit or its mechanical parts.
•The driver should not operate the operation panel while driving.
Opening/closing the operation panel
1.Press the [7] (OPEN/CLOSE) button.
The operation panel will be opened or closed.
Note:
•The operation panel will close automatically when leaving it open for a while.
•When the operation panel is open, the touch panel cannot be operated.
18 MAX685BT
