Setting/Ejecting a Disc
Setting a disc | CAUTION |
|
English
1.Press the [7] (OPEN/CLOSE) button to open the operation panel.
2.Insert a disc into the center of the insertion slot with the label side facing up.
The disc will automatically be drawn into the DVD player.
After setting a disc
The system will automatically be switched to the relevant source media mode according to the disc, and start playing back the disc.
When a DVD video disc is set:
The system is switched to the DVD Video mode. See “DVD Video Operations” (page 28).
When an Audio CD is set:
The system is switched to the CDDA mode. See “Audio CD Operations” (page 34).
When a CD/DVD with MP3/WMA/AAC/DivX files is set:
The system is switched to the MP3/WMA/AAC mode or DivX mode according to the Playform setting. See “MP3/WMA/AAC Operations” (page 36) or “DivX Operations” (page 39).
Note:
•Never insert foreign objects into the disc insertion slot.
•If the disc is not inserted easily, there may be another disc in the mechanism or the unit may require service.
•8 cm (single play) discs cannot be used.
For your safety, the driver should not insert or eject a disc opening the operation panel while driving.
Ejecting a disc
1.Press the [7] (OPEN/CLOSE) button to open the operation panel.
2.Press the [o] (EJECT) button to eject the disc.
The screen changes to the DVD mode screen, and “EJECT” appears.
•If a disc is left in the ejected position for 15 seconds, the disc is automatically reloaded (Auto reload).
3.Remove the disc carefully.
Note:
•If you force a disc into the insertion slot before auto reloading, this can damage the disc.
Owner’s manual
