Clarion MAX685BT owner manual Telephone operations, Obtaining the Phone Book data

Bluetooth Telephone Operations

English Owner’s manual

3.Touch the [Add] key to display the Add the Cellular screen.

4.Touch your desired Cellular key to select the key for the cellular phone to be registered.

•You cannot select the Cellular key of which another cellular phone is already registered. Select a blank Cellular key.

5.Touch the [Search] or [Wait] key.

[Search]:

The system starts searching a cellular phone.

[Wait]:

The system waits to be detected by a cellular phone.

6.When you specify “Search”, perform the acknowledgement operation for the Bluetooth connection on your cellular phone, if it is prompted.

When you specify “Wait”, perform the search operation of Bluetooth devices on your cellular phone. Then, touch the name of the cellular phone displayed on the screen of this unit.

7.If entering the Pass Key code is prompted on your cellular phone, enter the Pass Key code set to this unit.

•You can change the Pass key setting of this unit by the BT Info screen under the Telephone Settings screen.

When the pairing operation completes, the registered cellular phone is set as the current telephone, and the display returns to the Telephone screen.

Note:

•You cannot register the same cellular phone which is already registered doubly. If you wish to change the Cellular key registered, once delete the corresponding cellular phone from the current Cellular key, and then register it again to your desired Cellular key.

●To delete the cellular phone registration 1. Touch the [Cellular] key.

2.Touch the [Delete] key to display the Delete the Cellular screen.

3.Touch the desired Cellular key you wish to delete.

A confirmation screen is displayed.

4.Touch the [Yes] key to perform deletion.

The corresponding cellular phone is set as the current telephone.

•If the power of the cellular phone is not turned on, turn it on.

•The cellular phone may prompt to acknowledge the Bluetooth connection or to enter the Pass Key code of this unit. Perform these operations according to the message displayed.

3.Touch the [Back] key to return to the previous screen.

Obtaining the Phone Book data

Sending the Phone Book data from the cellular phone enables you to make a call using the Phone Book function from this unit.

1.Perform the Object Push transfer operation of the Phone Book data on the current cellular phone.

For details of the operation, see the operation manual of the cellular phone.

Note:

•Some cellular phones may not be able to transfer the Phone Book data.

•Some cellular phones cannot transfer the Phone Book data when the hands-free mode is set or it is also registered in the Bluetooth mode. In those cases, disable these functions from the cellular phone before performing the Object Push transfer.

Telephone operations

Note:

•For your safety, this system disables the calling functions when the car is moving. Be sure to stop the car and apply the parking brake before making a call.

Making a call using the Ten-Key pad

1.Touch the [10Key] key to display the Ten-Key pad screen.

2.Enter the telephone number by using the Ten- Key pad displayed on the screen.

3.Touch the [ ] (Send) key to call the entered number.

•The following Telephone Interrupt screen is displayed during phone call.

Selecting the cellular phone

To change the current cellular phone to the other device which is already registered, perform the following operation.

1.Touch the [Cellular] key to display the Cellular Select screen.

2.Touch the desired Telephone key you wish to use.

54 MAX685BT