Clarion MAX685BT Bluetooth Telephone Operations, Registering your cellular phone Pairing

Bluetooth Telephone Operations

•Select either LOW or HIGH depending on the type of your vehicle and cellular phone.

•The factory default setting is “LOW”.

2-1. Touch the [LOW] or [HIGH] key of the Noise Canceller item to set the function.

[LOW]:

Suitable for a GSM cellular phone.

[HIGH]:

Suitable for a CDMA cellular phone.

●Setting Ring Tone Select

The system can ring if the cellular phone cannot generate ring tones when the Bluetooth connection has been established.

• The factory default setting is “AUTO”.

2-1. Touch the [AUTO] or [Internal] key of the Ring Tone Select item to set the function.

[AUTO]:

The system will ring only when the cellular phone cannot generate ring tones.

[Internal]:

The system will ring regardless of the cellular phone. Select this when no ring tone is generated with the “AUTO” selected.

●Setting Ring Tone Volume

You can adjust the volume of the ring tone in 10 levels.

• The factory default setting is “5”.

2-1. Touch the [[] or []] key of the Ring Tone Volume item to adjust the volume level.

●Setting Registration Type

You can change the distribution of maximum number of Phone Book data can be registered to each telephone.

• The factory default setting is “3”.

2-1. Touch the [C] key to display the next screen.

2-2. Touch the [1], [2], or [3] key of the Registration Type item to set the function.

[1]:

Allows 250 records for first two cellular phones, and no record for the others.

[2]:

Allows 200 records for first cellular phone, 100 records for second and third cellular phones, and 50 records for the others.

[3]:

Allows 100 records for each cellular phone.

●Selecting Microphone

You can select the microphone to be used.

• The factory default setting is “Internal”.

2-1. Touch the [C] key to display the next screen.

2-2. Touch the [External] or [Internal] key of the Microphone Select item to set the function.

Note:

•When the “Internal” is selected, and a call comes in during the operation panel open, the operation panel is automatically closed because the microphone is on the operation panel.

•When the “Internal” is selected, the [7] (OPEN/ CLOSE) button is disabled during a call.

●Setting Microphone Gain

You can adjust the input level of the microphone in 5 levels.

• The factory default setting is “3”.

Note:

•The input level of the microphone can be affected by its surroundings. Adjust the level when the person on the other end of the telephone has a reception problem.

2-1. Touch the [C] key to display the next screen.

2-2. Touch the [[] or []] key of the Microphone Gain item to adjust the input level.

●Confirming Bluetooth Information and setting Pass Key

You can confirm the various information concerning the Bluetooth Interface features.

2-1. Touch the [C] key to display the next screen.

2-2. Touch the [Info] key of the BT Info item to display the information on the screen.

2-3. When you finish confirming the Bluetooth information, touch the [Back] key to return to the previous screen.

If you want to change the Pass Key setting of this unit, perform the following steps.

2-4. Touch the text box of the Pass Key item to display the Ten-Key Pad screen.

• The factory default setting is “1234”.

2-5. Enter your desired 4-digit PIN number, then touch the [ENT] key.

Registering your cellular phone (Pairing)

You can register up to 5 cellular phones.

1.Turn on the power of the cellular phone you wish to register.

2.Touch the [Cellular] key to display the Cellular Select screen.

English Owner’s manual

MAX685BT 53