General Settings
Displaying the General Settings screen
You can customize the various settings of this unit from the General Settings screen.
1.Press the [MENU] button. The Menu screen appears.
2.Touch the [General] key.
The General Settings screen appears.
3.Touch the desired Tab key, and perform the adjustment.
See the following sections for details.
•In the following sections, only the details regarding adjustments are described, procedures to select items are skipped.
4.When the adjustment completes, touch the [Back] key to return to the previous screen.
Setting Camera Interrupt
When the optional CCD camera is connected to this unit, the rear view image is displayed on the screen when the gear lever is put in the reverse gear position.
• The factory default setting is “OFF”.
Setting the VTR system (NTSC/PAL)
• The factory default setting is “NTSC”.
Note:
•This setting is applied only to the AUX video input.
Setting the Beep
The sound heard when you make operations is called “beep”. The system can be set so that it does not produce this beep sound.
• The factory default setting is “ON”.
Setting the Blink LED
When this function is set to “ON”, the Blink LED indicator will blink when the ACC power is turned off.
• The factory default setting is “OFF”.
•Setting the CATS function (see page 62) turns on the Blink LED function as well.
English Owner’s manual
Setting Camera Warning
The following warning message is displayed during use of the CCD camera: “Make sure of safety around your vehicle”.
• The factory default setting is “ON”.
Note:
•This setting is disabled when the Camera Interrupt feature is set to OFF.
