Acer X1160 manual Management setting, Security

Management setting

19

English

Auto Shutdown	The projector will automatically shutdown when there is no signal
	input after the allocated time. (in minutes)
Source Lock	When source lock is turned "off", the projector will search for
	other signals if the current input signal is lost. When source lock is
	turned "on", it will "lock" the current source channel unless you
	press "Source" button on the remote control for the next channel.
Menu Location	Choose the menu location on the display screen.
Lamp Hour Elapse	Displays the lamp’s elapsed operating time (in hours).
Lamp Reminding	Activate this function to display a reminder to change the lamp 30
	hours before its expected end-of-life.
Lamp Hour Reset	Press the		button after choosing "Yes" to turn the lamp hour
	counter to 0 hours.
Security	Security
	This projector provides a useful security function for the
	administrator to manage usage of the projector .
	Press		to change the "Security" setting. If the security function
	is enabled, your must enter the "Administrator Password" first
	before changing the security settings.
	•	Select "On" to enable the security function. The user has to
		enter a password to operate the projector. Please refer to the
		"User Password" section for details.
	•	If "Off" is selected, then the user can turn on the projector
		without password.

Timeout(Min.)

Once "Security" is activated to "On", the administrator can set timeout function.

•Press or to select the timeout interval.

•The range is from 10 minute to 990 minutes.

•When the time is up, the projector will prompt the user to enter the password again.

•The factory default setting of "Timeout(Min.)" is "Off".

•Once the security function is enabled, the projector will request user to enter password when switch on the projector . Both "User Password" and "Administrator Password" can be accepted for this dialogue.