Clarion MAX685BT Erasing the Personal Code, When the Enter Personal Code screen appears

General Settings

3-3. Enter the same Personal Code again for confirmation, then touch and hold the [ENT] key for more than 2 seconds.

The entered Personal Code will be set, and it will return to the previous screen.

Note:

•Write down your Personal Code in case you forget it.

Erasing the Personal Code

3-1. Keep pressing the [MENU] button more than 2 seconds.

The Erase Code screen appears.

3-2. Enter the Personal Code currently set by touching the [0] to [9] keys, then touch and hold the [ENT] key for more than 2 seconds. The message “Code erased” appears, and it will return to the previous screen.

When the ENTER PERSONAL CODE screen appears

The Personal Code screen will be displayed when turning the ACC power on after performing the following operations:

•The car battery was replaced.

•The backup power was cut off.

•The Reset button was pressed.

Note:

•If you forgot your Personal Code, please consult your dealer or an authorized Clarion service center.

1.Enter your Personal Code currently set.

2.When the correct Personal Code is entered, the unit will restart from the initial startup screen.

Note:

•When you enter a wrong Personal Code, the message “Code Incorrect” is displayed and the Personal Code entry is prohibited for a while. This prohibited time is changed according to the number of times of wrong code entry as follows:

•1 to 6 times: 15 seconds

•7 times or more: 15 minutes

English Owner’s manual

MAX685BT 63