Toshiba 245, 225, e-STUDIO195 manual Place paper in the drawer, When placing LD size paper

1 PREPARATION

4 Place paper in the drawer.

yThe maximum number of sheets that can be placed at one time is 250 (64 to 80 g/m2). Be sure that the stack height of paper is not higher than the line indicated at the inner side of the side guide and trailing guide.

P.39 “Acceptable media types”

yFan the paper well before placing it in the drawer, otherwise multiple feeding could occur. Be careful that the paper does not cut your fingers.

yPlace the paper face up. You may tell its “face” by the note on its wrapping paper.

yDo not allow any gap between the paper and the right side wall in the drawer.

When placing LD size paper

To place LD size paper in the drawer, the end guide needs to be removed. Move it to the left end while pushing its lower part from both sides, and then pull it upward. Keep it in the pocket on the front side of the drawer.

	2
3	1

42 Preparation 2 - Placing Copy Paper