Toshiba e-STUDIO195, 225, 245 manual JOB Build OFF, Ready JOB Build, Ams, Place the next job

4 ADVANCED COPYING FUNCTIONS

4 Selectton. “ON”, press the [ENTER] button, and then the [CANCEL] but-

JOB BUILD

ON

OFF

The job build function is set and the LCD screen shows as follows:

READY		1
(JOB BUILD)
AMS	SORT
ZOOM	FINISHING	EDIT

5 Place the first job of the originals.

6 Select other copy modes as required, and then press the [START] button.

Scanning starts. When the scanning is finished, the LCD screen shows as follows:

JOB BUILD

Scan next page

End job build

7 Place the next job.

Repeat steps 6 and 7 until all the jobs are scanned.

8 When all the originals have been scanned, select “End job build”, and then press the [ENTER] button.

JOB BUILD

Scan next page

End job build

Copying starts.

104 Changing Copy Setting on Each Job - JOB BUILD -