Toshiba 245, 225, e-STUDIO195 manual General Precautions, When installing or moving

General Precautions

When installing or moving

Warning

yThis equipment requires 220 to 240 V AC, 8 A 50/60 Hz electric power. For Saudi Arabia 100 V version, it requires 127 V AC, 12 A 50/60 Hz electric power.

Do not use a power supply with a voltage other than that specified.

Avoid multiple connections in the same outlet. This could cause a fire or give you an electric shock. If you are considering increasing the number of outlets, contact an electrician.

yAlways connect this equipment to an outlet with a ground connection to avoid the danger of fire or electric shock in case of short-circuiting. Contact your service representative for the details. Be sure to use a 3-conductor, grounded wall outlet.

In areas, where a 2-pin plug is used, the equipment must be grounded for safety. Never ground it to a gas pipe, a water pipe, or any other object not suitable for grounding.

yPlug the power cable securely into the outlet. If it is not plugged in properly, it could heat up and cause a fire or give you an electric shock.

yDo not damage, break or attempt to repair the power cable. The following things should not be done to the power cable.

-Twisting it

-Bending it

-Pulling it

-Placing anything on it

-Making it hot

-Situating it near radiators or other heat sources

This could cause a fire or give you an electric shock. If the power cable is damaged, contact your service representative.

yDo not install the equipment by yourself or try to move it once it has been installed. This could result in an injury or damage to the device. Contact your service representative if the equipment needs to be installed or moved.

yPull the plug out from the outlet more than once a year to clean around the prongs. Accumu- lating dust and dirt could cause a fire due to the heat released by electric leakage.

18 General Precautions