Toshiba 245, 225, e-STUDIO195 manual Did you change paper size?

5 CHANGING EQUIPMENT’S SETTINGS

If “ON” is selected, a message appears when the drawer is closed.

If you set “ON” for “DRAWER SET POP-UP”, a message will appear when the drawer is closed. In this case, register the paper size according to the following procedure.

1 If you placed paper whose size is different from that of the paper previously set, select “YES”. If not, select “NO”.

Did you change paper size?

1.YES

2.NO

If you select “NO”, the operation is completed.

If you select “YES”, proceed to step 2.

2	Select the size of the paper which has been placed with	and
	buttons, and then press the [ENTER] button.

Select paper size

01.A3

02.A4

03.A4-R

The paper size is registered.

If more than one drawer is closed at the same time, the size of the paper set in the drawer that was closed first is applicable to the registration. Set the paper size for the subsequent drawers separately.

P.125 “Paper Size Setting”

168 Pop-Up Display Setting