Toshiba 245, 225, e-STUDIO195 manual When black streaks appear on the copied image

Using Reversing Automatic Document Feeder (optional) / Automatic Document Feeder (optional)

When a stack of originals are placed on the Reversing Automatic Document Feeder (optional) / Automatic Document Feeder (optional), the originals are automatically scanned one by one. The

following types of originals are available *1:

Media types	Maximum size	Maximum number of	Paper weight
		sheets acceptable
Plain paper	297 mm x 432 mm	100 sheets	50 - 127 g/m2
		(or stack height 16 mm)

*1 To scan 2-sided originals, the Reversing Automatic Document Feeder (optional) is required.

ySome media types may not be used.

yThe maximum number of sheets acceptable varies depending on the media types of the originals.

yA5 size originals must be placed in a landscape direction.

ySizes which the Reversing Automatic Document Feeder (optional) / Automatic Document Feeder (optional) can detect automatically are A3, A4, A4-R, A5-R, B4, B5, B5-R and FOLIO. (The size of FOLIO originals can be detected automatically only when they are placed on the Reversing Automatic Document Feeder (optional).)

Precautions for Reversing Automatic Document Feeder (optional) / Automatic Document Feeder (optional)

Do not use the following types of original since such types may cause a paper jam or damage to the equipment:

yExtremely wrinkled, folded or curled ones

yOnes with carbon paper

yTaped, pasted or cut-out ones

yClipped or stapled ones

yOnes with holes or tears

yDamp ones

yOverhead transparencies or tracing paper

yCoating paper (e.g. coated with wax)

yOnes with many holes punched (e.g. loose leaf paper)

The following types of originals are usable but need extra care:

yOnes which cannot be made to slide with the fingers or whose surface is specially treated (they may not be able to be separated from each other at feeding)

yFolded or curled ones (should be smoothed out before being used)

When black streaks appear on the copied image

If the scanning area or the guide area is dirty, image problems such as black streaks on the cop- ied image may occur. Weekly cleaning of these areas is recommended.

P.204 “Daily Inspection”

Placing Originals 57