Toshiba e-STUDIO195, 225 Paper jams within fuser unit, Close the transfer unit and the side cover

6 Check that the guide width is correct, there is no folded/curled paper or overloading, and then close the drawer.

yBe sure that the height of the stacked paper does not exceed the line indicated inside of the side guides.

yDo not allow any gap between the paper and the end guide in the drawer.

7 Close the transfer unit and the side cover.

Paper jams within fuser unit

yBe careful not to let your fingers be caught between the equipment and the side cover. This could injure you.

yDo not touch the fuser unit or the metal part around the unit.

This could cause burns, or injury to your hands if you touch the inside of the equipment.

Paper Jams 185