Toshiba e-STUDIO195 Check the menu, Nonsize, Set the paper size, Set the paper type, Thick PAPER1

2 Check the menu.

If the paper size has already been registered, the following menu is displayed. In this case, proceed to step 5.

Ready for bypass		1
100%	SORT
ZOOM	FINISHING	EDIT

If the paper size has not been registered, the following menu is displayed. In this case, proceed to step 3.

Select paper size

COMP

13LG

NON_SIZE

3 Set the paper size.

Press the selecting buttons (Center, Right) to select the size of paper placed in the

drawer. This can also be done with the or button. Then press the [ENTER] button. e.g.) Setting A4 size

Select paper size

ST-R

A3

A4

When the paper is other than standard sizes, select “NON_SIZE”.

4 Set the paper type.

Press the selecting button (Right) to select paper type. This can also be done with the

or button. Then press the [ENTER] button. e.g.) Thick paper (81 to 105 g/m2)

PAPER TYPE

THICK PAPER1

THICK PAPER2

TRANSPARENCY

You can select the media type from the following four: THICK PAPER 1: Thick paper (81 to 105 g/m2)

THICK PAPER 2: Thick paper (106 to 163 g/m2), sticker labels

TRANSPARENCY: Overhead transparencies

PLAIN: Plain paper (64 to 80 g/m2), tracing paper

If you select a different media type from the one you placed on the bypass tray, this could cause a paper jam or the quality of the copied image could be lowered.

Using Bypass Tray 65