Toshiba 225, e-STUDIO195, 245 manual Original/Copy paper-related items, Image trouble

Original/Copy paper-related items

Phenomenon	Usual cause	Countermeasure
An original jams.	An original not acceptable for	Check if the original is acceptable for the
	the equipment is being used.	equipment.
		P.57 “Precautions for Reversing Auto-
		matic Document Feeder (optional) / Auto-
		matic Document Feeder (optional)”
Copy paper jams.	Copy paper not acceptable	Check if the copy paper is acceptable for
	for the equipment is being	the equipment.
	used.	P.40 “Paper types not acceptable”
	The size of the copy paper in	Register the size of the placed copy paper
	the drawer or on the bypass	properly.
	tray is not registered prop-	P.49 “Preparation 3 - Registering Size
	erly in the equipment.	of Paper Placed”
		P.64 “Bypass copying”
	Jammed paper is located in	See the message on the display to
	a place you cannot see eas-	recheck the position where the paper jam
	ily.	has occurred.
		P.176 “Paper Jams”
	There is no gap between the	Adjust the gap between the side guides
	side guides and paper in the	and the paper properly.
	drawer. Or the gap is too	P.41 “Placing paper in drawers”
	wide.
	There is a gap between the	Do not allow any gap between the paper
	paper and the end guide in	and the end guide in the drawer.
	the drawer.	P.41 “Placing paper in drawers”
Multiple feeding occurs.	Paper is clinging to each	Fan the paper well and place it again.
	other.

Image trouble

Phenomenon	Usual cause	Countermeasure
The density of the copy	Toner has run out.	“Toner empty” appears on the display
image is light.		when toner has run out. Replace the toner
		cartridge if the message appears.
		P.190 “Replacing Toner Cartridge”
	The copy density is set	Make the density darker if you use the
	lighter.	manual copy density mode. Or use the
		automatic copy density mode.
	The transfer charger wire is	Clean the transfer charger wire.
	dirty.	P.206 “Cleaning transfer charger”
The density of the copy	The copy density is set	Make the density lighter if you use the
image is dark.	darker.	manual copy density mode. Or use the
		automatic copy density mode.

Before Calling Service Technician 199