Toshiba 245, 225, e-STUDIO195 manual When bypass copying has finished

2 HOW TO MAKE COPIES

5 Place the original.

6 Select the other copy modes as required, and then press the [START] button.

Copying starts.

When you make copies on overhead transparencies using the bypass tray, pick up the transparencies which have exited onto the receiving tray one by one. If the transparen- cies pile up, they may become curled and not be good for projection.

When the paper on the bypass tray has run out during copying, copying continues with the paper of the same size in the drawer as the one on the bypass tray. (If the size of the paper on the bypass tray has not been registered in advance, however, copying stops. In this case, add paper to the bypass tray and press the [START] button to resume copy- ing.)

When bypass copying has finished

If the paper on the bypass tray has been removed or used up, bypass feeding will be automati- cally switched to drawer feeding. The paper size setting for the bypass tray will also be cleared.

66 Using Bypass Tray