Toshiba 225, e-STUDIO195 Place a card original on the original glass, 100% Sort Zoom Finishing

5 Place a card original on the original glass.

Place the card face down, aligning and pushing it to the left rear corner of the original glass.

The portion of an original which is on the upper and left edges (width of approx. 2 mm) of the original glass may not be copied. Place an original away from both edges, if you want to copy the whole of the original.

6 Lower the Platen Cover (optional) or the Reversing Automatic Doc- ument Feeder (optional) / Automatic Document Feeder (optional) carefully.

7 Select the other copy modes as required, and then press the [START] button.

The scanning of its top side starts. The LCD screen shows as follows:

Set back of ID CARD

100% SORT ZOOM FINISHING

1

EDIT

8

9

Raise the Platen Cover (optional) or the Reversing Automatic Docu- ment Feeder (optional) / Automatic Document Feeder (optional).

Turn over the card and place it on the original glass again.

Align and push it to the left rear corner of the original glass.

The portion of an original which is on the upper and left edges (width of approx. 2 mm) of the original glass may not be copied. Place an original away from both edges, if you want to copy the whole of the original.

Copying Both Sides of Card into 1 Page - ID CARD - 109