Panasonic KX-TCD961CXB Special Features, How to Use the Pause Feature, Setting the pause timing

KX-TCD961CXB(22~27) 99.12.3 2:08 PM Page 26

Special Features

How to Use the Pause Feature

(For Analog PBX Line/Long Distance Service Users)

We recommend you press if a pause is required for dialing with a PBX or to access a long distance service.

Ex: Line access number 0 (PBX)

0➡ ➡ Phone number

•Pressing once creates a pause.

This prevents misdialing when you redial or dial a stored number.

•Pressing more than once increases the length of the pause between numbers.

Setting the pause timing

You can set the pause timing to 3 seconds or 5 seconds, depending on your PBX requirements. The factory preset is 3 seconds.

Make sure that the power is ON (p. 13) and the unit is in the stand-by mode.

1	Press	then I N T .
2	Press	3 .

3Enter the base unit password (p. 29).

•The factory preset is 0000.

4Press 3 .

•The current timing is displayed.

1: 3 seconds 2: 5 seconds

Ex. 3 seconds is selected.

33 i

5To select 5 seconds, press 2 .

OR

To select 3 seconds, press 1 .

6 Press .

•A confirmation tone sounds and the display will return to the stand-by mode.

•If 5 beeps sound in step 3, the entered password is incorrect. Enter the correct password.

26