Panasonic KX-TCD961CXB Remote Operation with the Handset, During a conversation, press Then

KX-TCD961CXB(38~46) 99.12.3 2:19 PM Page 46

Remote Operation with the Handset

Direct commands

4	NEW MESSAGE PLAYBACK
	• Only new messages are played
	back.
5	ALL MESSAGE PLAYBACK
	• All messages are played back.
1	REPEAT (During playback)
	• The current message is repeated.
2	SKIP (During playback)
	• The current message is skipped.
	The next message is played.
9	STOP (During playback)

• Playback is temporarily stopped.

• To resume playback, press 9 again within 15 seconds, or the help menu (p. 45) will start.

0

8

4	ERASING A SPECIFIC MESSAGE
	(During playback)

•The current message is erased.

•A short beep will sound and the next message will be played.

5 ERASING ALL MESSAGES

•All recorded messages are erased.

•A long beep sound and “No message” are heard.

ANSWERING SYSTEM OFF

•The answering system is turned off and will not answer calls until turned on again.

ANSWERING SYSTEM ON

•The answering system is turned on and is in the stand-by mode for receiving calls.

Recording your telephone conversation using the handset

You can record a telephone conversation.

1During a conversation, press

then .

•“” is displayed on the handset.

2Continue your conversation.

3When finished, press then .

•When you record your 2-way telephone conversation, you should inform the other party that the conversation is being recorded.

•If “” goes out, memory may be full.

46