Panasonic KX-TCD961CXB Listening to Messages, Listening to only new messages, During playback

KX-TCD961CXB(38~46) 99.12.3 2:18 PM Page 39

Listening to Messages

You can see the total number of recorded messages on the base unit display. If the ANSAGE indicator flashes, new messages have been recorded.

Listening to only new messages

Press briefly.

•The unit announces the number of new messages and plays them back.

•During playback, the display shows the message number.

•To increase the volume, press . To decrease the volume, press .

Listening to all recorded messages

Press and hold firmly until a short beep sounds.

At the end of the last message, 3 beeps sound.

After the announcement, the unit will automatically turn the answering system back on.

Flash Memory Message Backup

Messages are stored indefinitely on a “flash memory” IC chip – even if a power failure occurs. All of the messages are saved until you erase them.

During playback

To repeat message	Press	.
	• If you press within 5 seconds of playback, the previous message will be
	played.
To skip message	Press	.
	• The next message is played.
To stop operation	Press		.
	• To resume playback, press			. To turn on the answering system,
	press	ANSWER ON .

Chapter 4 Answering System

39