Panasonic KX-TCD961CXB Speed Dialer, Storing Phone Numbers in Memory, Dialing a Stored Number

KX-TCD961CXB(22~27) 99.12.3 2:08 PM Page 24

Speed Dialer

Storing Phone Numbers in Memory

You can store up to 20 phone numbers in the handset.

Make sure that the power is ON (p. 13) and the unit is in the stand-by mode.

1Press G or F until a desired memory station number (00 to I ) is displayed.

•You can enter the desired memory station number after pressing G or F.

00 -

2 Press .

3Enter a phone number, up to 24 digits.

00 - 3334444

•If you misdial, press C . Digits are erased from the right. To erase all digits, press C firmly.

4 Press .

•A confirmation tone sounds and the display will return to the stand-by mode.

•To store other numbers, repeat steps 1 through 4.

•If a pause is required for dialing, press

where needed. Pressing counts as one digit (p. 26).

•To cancel during programming, press , then start from step 1.

Memory card

Use the memory card on page 65 as a name or phone number index for speed dialer.

Cut out the card and attach it in a convenient place.

To erase a stored number

1Press G or F until the desired phone number is displayed.

•You can also enter the desired memory station number (00 to I ) after pressing G or F.

2Press .

3Press C .

4Press .

Dialing a Stored Number

1Press G or F until the desired phone number is displayed.

•You can also enter the desired memory

station number (00 to I ) after pressing G or F.

• To exit the speed dialer memory, press C .

2 Press .

•The number is automatically dialed.

24