KX-TCD961CXB(28~33) 99.12.3 2:15 PM Page 29

Setting the Password

You can program a 4-digit password for both the handset and base unit individually. Each factory preset is 0000. Changing the password may prevent the unauthorized use of your unit by another person.

Once you have programmed the password, you cannot confirm it. We recommend you write down the password. If you forget it, please consult your nearest Panasonic Service Center.

On the handset

You need to enter the password when using the functions, such as “Setting the call prohibition” (p. 31), “Clearing the settings in handset memory” (p. 37) and “Canceling a base unit” (p. 50).

1 Press .

2Press G or F until “F5 ” is displayed, then press O K .

F5o - - - -

3Enter the current handset password.

The factory preset is 0000.

4Enter the new 4-digit password TWICE.

F5o - - - - o - - - -

If you misdial, press C . Digits are erased from the right.

A confirmation tone sounds and the display will return to the stand-by mode.

If 5 beeps sound in step 3, the entered password is incorrect. Enter the correct password.

On the base unit

You need to enter the password when using the functions such as “Setting the dialing mode” (p. 13), “Setting the pause timing” (p. 26), “Setting the call restriction” (p. 32), “Storing the carrier code/area code” (p. 35), “Clearing the settings of the base unit memory” (p. 37), “Registering a handset in the base unit” (p. 48), “Canceling a handset” (p. 50) and “Setting the bell selection” (p. 51).

1

Press

then I N T .

2

Press

5 .

5o - - - -

3Enter the current base unit password.

The factory preset is 0000.

5o - - - - o - - - -

4Enter the new 4-digit password TWICE.

A confirmation tone sounds and the display will return to the stand-by mode.

Chapter 3 Cordless Telephone (Advanced Operations)

29

Page 29
Image 29
Panasonic KX-TCD961CXB operating instructions Setting the Password, F5o - - o