Connections and settings
11
VQT3B11
After completing “Easy Setting”, you can continue with
“Network Easy Setting”.

Follow the on-screen instructions and make

the settings with [2,1] and press [OK].

Network Easy Setting
(Home Network Connection Check)
Network Easy Setting
(Internet Connection Test)
Refer to the operating instructions of the hub or router.
You can perform this setup anytime by selecting “Network Easy Setting”
in the Setup menu. (26)
You can redo these settings individually using “Network Settings”.
(26)
Network Easy Setting

When you experience

problems with settings

Display Check the
following
1. LAN cable connection Fail Connection
of the LAN
cables (9)
2. IP address setting Fail
3. Connection to gateway Fail
1. LAN cable connection Pass Connection
and settings
of the hub
and router
Settings of
“IP Address /
DNS
Settings”
(26)
2. IP address setting Fail
3. Connection to gateway Fail
1. LAN cable connection Pass
2. IP address setting
Pass or
Home
network
available
3. Connection to gateway Fail
OK
RETURN
Network Easy Setting
LAN setup and testing of home network and Internet
connections are required for Internet functions
(BD-Live etc.).
Broadband Internet connection is necessary for BD-Live.
Is a LAN cable already connected ?
Please refer to the operating instructions about network
connection.
Press [OK] to proceed.
OK
Network Easy Setting (Home Network Connection Check)
Yes No
Complete.
1. LAN cable connection
2. IP address setting
3. Connection to gateway
LAN cable is not connected.
Please check the connection.
Select “Yes” and press [OK] to check network
connection again.
Select “No” and press [OK] to finish Network
Easy Setting.
Fail
Fail
Fail
Display Check the following
Cannot find the
server.
(B019)
“Primary DNS” and “Secondary
DNS” settings of “IP Address /
DNS Settings” (26)
Failed to connect to
the server.
(B020)
The server may be busy or the
service may have been
suspended. Please wait a few
moments, and then try again.
Settings of “Proxy Server
Settings” (26) and the router
OK
Network Easy Setting (Internet Connection Test)
Complete.
- Connection to the Internet Fail(B019)
Failed the connection test.
Cannot find the server.(B019)
Please refer to the operating instructions for the cause
of the error and the countermeasure for it.
Press [OK].
DMP-BD75GNGCGAGW-VQT3B11.book 11 ページ 2011年2月9日 水曜日 午後7時28分