26 VQT3B11

TV Aspect

Set to match the type of television connected.
When connected to a 4:3 aspect television and playing 16:9
ratio image:
When connected to a 16:9 widescreen television and
playing 4:3 ratio image:

HDMI Connection

Press [OK] to show the following settings:

TV System

Perform the setup so it matches the TV System of the
connected TV.
≥When NTSC contents are played, they are outputted in the
signal format specified in the “NTSC Contents Output”,
irrespective of the settings here.

Network Easy Setting (11)

Network Settings

Perform network-related settings individually.
Press [OK] to show the following settings:
TV / Device Connection
4:3 Pan &
Scan
The sides are cut off so
the picture fills the
screen. When playing
BD-Video, video is
output as “4:3
Letterbox”.
4:3
Letterbox
Black bands appear at
the top and bottom of the
picture.
16:9 Video is displayed as a 4:3 ratio image in
the centre of the screen.
16:9 full Video is displayed as a horizontally
stretched 16:9 image.

HDMI Video Format

The items supported by the connected devices are
indicated on the screen as “¢”. When any item without “¢”
is selected, the images may be distorted.
≥If “Automatic” is selected, automatically selects the
output resolution best suited to the connected television.
≥To enjoy high-definition video up-converted to 1080p,
you need to connect the unit directly to 1080p
compatible HDTV (High Definition Television). If this unit
is connected to an HDTV through other equipment, the
other must also be 1080p compatible.

24p Output

When this unit is connected to a TV supporting 1080/24p
output using an HDMI cable, movies and other material
recorded at 24p are output at 24p.
≥When BD-Video images other than 24p are played,
images are output at 60p.
≥24p :
A progressive image recorded at a rate of 24 frames per
second (motion-picture film). Many BD-Video movie
contents are recorded in 24 frames/second in
accordance with the film materials.

HDMI Audio Output

This setting selects whether or not to output audio from
HDMI.

VIERA Link

Set to use “HDAVI Control” function when connected with
an HDMI cable to a device that supports “HDAVI Control”.
≥Select “Off” when you do not want to use “HDAVI
Control”.

Deep Colour Output

This setting is for selecting whether to use Deep Colour
Output when a television that supports Deep Colour is
connected.

Contents Type Flag

Depending on the playback content, the TV will output
adjusting to the optimal method when a TV that supports
this function is connected.
Network

IP Address / DNS Settings

This is for checking the state of the network connection
and setting the IP address and DNS-related.
Press [OK] to show the respective setting.
≥“Connection Speed Setting” is enabled only when
“Connection Speed Auto-Config” is turned “Off”.

Proxy Server Settings

This is for checking the state of connection with the Proxy
server and performing settings.
Press [OK] to show the respective setting.

MAC Address

Displays the MAC address of this unit.
DMP-BD75GNGCGAGW-VQT3B11.book 26 ページ ２０１１年２月９日　水曜日　午後７時２８分