Picture
NTSC Contents Output
Select “PAL60” or “NTSC” output when playing NTSC discs.
Sound
Dynamic Range Compression
You can listen at low volumes but still hear dialog clearly. (Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
≥“Auto” is effective only when playing Dolby TrueHD.
Digital Audio Output
Press [OK] to show the following settings.
Dolby D/Dolby D +/Dolby TrueHD
DTS/DTS-HD
Select the audio signal to output.
≥Select “PCM”, when the connected equipment cannot decode the respective audio format. This unit decodes the audio format and transmits to the connected equipment.
≥Not making the proper settings may result in noise.
Display
Choose whether to show status messages automatically.
[For\Asia[
Choose the language for menus and
Screen Saver Function
This is to prevent
≥When this is set to “On”:
If there is no operation for 10 minutes or more, DIRECT NAVIGATOR screen switches to HOME menu automatically.
≥While playing and pausing, etc., this function is not available.
≥As for Music
Front Panel Display
Changes the brightness of the unit’s display.
≥If “Automatic” is selected the display is dimmed during playback and bright except during playback.
BD-Video Secondary Audio
Select whether to mix or not mix the primary audio and secondary audio (including the button click sound). ( 16)
≥If “Off” is selected, the unit outputs the primary audio only.
Software Licence
Information about the software used by this unit is displayed.
Downmix
Select the downmix system of
≥Select “Surround encoded”, when the connected equipment supports the virtual surround function.
≥There is no effect on “Bitstream” via HDMI AV OUT.
≥The audio will be output in “Stereo” in the following cases:
–AVCHD playback
–Playback of secondary audio (including the button click sound).
Settings
VQT3B11 25
