SETUP Operation
SOURCE/POWER BAND/TEL.
g f F/SETUP
Turning Mute Mode On/Off
If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device. This function can be turned ON or OFF from the head unit by following procedure below.
1Press and hold the F/SETUP button for at least 3 seconds.
2Press the f or g button to select the MUTE mode.
3Press the BAND/TEL. button to turn on or off the MUTE mode.
Each press toggles between the MUTE ON and OFF modes.
NOTE
The initial setting at the factory is “MUTE ON.”
4Press the F/SETUP button again to return to normal operation.
Setting the Tone Defeat for External Devices
When inputting external devices to this unit, turning DEFEAT ON will bypass BASS,TREBLE and MX, i.e., sound for external devices is output at the default setting.
1Press and hold the F/SETUP button for at least 3 seconds.
2Press the f or g button to select "INT."
3Press the BAND/TEL. button to toggle the mode between INT ON and INT OFF.
When using Initial mode, set this to ON.
When the Initial mode is not selected, set this to OFF.
4Press the F/SETUP button to return to normal mode.
Setting the AUX Mode (V-Link)
You can input TV/video sound by connecting an optional
1Press and hold the F/SETUP button for at least 3 seconds.
2Press the f or g button to select “AUX.”
3Press the BAND/TEL. button to toggle the mode between AUX ON and AUX OFF.
NOTES
•The initial setting at the factory is AUX OFF.
•You can set the AUX mode display by pressing the
g or f button after AUX ON is set, select the AUX mode display setting, and then press the BAND button.
•When connecting the
4Press the F/SETUP button to return to normal mode.
5To adjust the volume, etc., first press the SOURCE/ POWER button and select the AUX mode, then make the necessary adjustment.
NOTE
When using the Versatile Link Terminal
