Zenith H20J55DT warranty Pillow Speaker Connection & Setup, Pillow Speaker Setup

Pillow Speaker Connection & Setup

Pillow speaker is not included with the HealthView TV

Pillow Speaker Setup

1Locate the Pillow Speaker output jack on the back of the HealthView TV.

2Connect an accessory pillow speaker or wired remote control unit to this 6-pin jack.

3Connect the pillow speaker as shown in the illustration.

4Set the Pillow Speaker switch to Pillow Speaker setting. Note: Once the switch is set to Pillow Speaker, no audio

will be heard from the TV speakers.

Use a pillow speaker by Curbell, Model A-16455-02 or other UL recognized pendant control bearing the warn- ing: “Risk of fire if used in oxygen enriched atmos- phere. Keep pendant control away from oxygen equipment.”

TV Back

TV

SPKR

Antenna

Cable

PILLOW

SPKRVideo Speaker

In Out

M.P.I.

PILLOW SPEAKER

Audio

In

TV Back Panel

(Expanded View)

Controlling the TV with Serial Data

The TV is capable of being controlled by a single- wire, serial data signal. This is a Zenith patented technology and is being implemented by certain brands of “smart” pillow speakers, such as Curbell’s “GEN-II” models.

Page 14 206-4065