Zenith H20J55DT Learn Setup from Master TV, Teach Master TV’s Setup to Another Identical TV

Page 54

LT2002 QuickSet Programmer

Cloning

THE CLONE HAS CONTROL OF THE TV

THE CLONE IS VERSION				XX
THE TV IS VERSION				XX
THE SW IS REVISION				XX
CLONE CLOCK		=	XX:XX
TV	CLOCK	=	XX:XX

-PRESS ANY KEY TO CONTINUE.

-DISCONNECT CLONE WHEN DONE.

CLONE SELECTION MENU

(1)LEARN FROM TV

(2)TEACH TO TV

(3)SET CLONE CLOCK FROM TV

(4)SET TV CLOCK FROM CLONE

(5)DISPLAY TV SETUP

(6)DISPLAY CLONE SETUP

-TO CHANGE MENU ITEMS, PRESS CHANNEL KEYS OR DIGITS.

-TO EXECUTE ITEM, PRESS ON/OFF, POWER, OR ENTER

C. Learn Setup from Master TV

Press 1 to select the “Learn From TV” option, then press ON/OFF, POWER, or ENTER to go to the Memory Bank Selection Menu. Pick the Memory ”Bank” you want to store this Master TV’s Setup in by pressing either Channel key repeatedly to pick Memory 1, 2 or

3.(If you choose a Memory “Bank” that already has a master TV’s setup in it, it will be overwritten by this Master TV’s setup.)

Since the Clone Programmer’s time can- not be set directly, the time needs to

be copied from a Zenith TV equipped with M.P.I. Input capability.

Once the time is copied to the Clone programmer, the current time can then be transferred to another TV. (This can be a Master TV, or another TV which has had the features already set up.)

D. Teach Master TV’s Setup to Another Identical TV

After Learning is complete, remove the

Once the Clone memory bank is select-	M.P.I. cable from the master TV and
ed, press ON/OFF, POWER or ENTER. The connect it to the TV that you want to
Clone memory bank you have selected	copy the master TV’s setup to. With the
will be shown. Press ON/OFF or POWER
	“TV is Controlled by Clone” message
to begin copying the master TV’s setup.
	displayed, press 2 or use either Channel
Ca. Set the Clock (Optional)	key to go to the “Teach to TV” option,
Set the time on the Master TV’s Clock.	press ON/OFF, POWER or ENTER.
(If the time has already been copied	Follow on-screen instructions to trans-
from another TV into the Clone pro-
	fer the Setup and other information to
grammer, you can set the Master TV’s
	the “Learning” TV. After the “Teach to
clock by copying the time from the
	TV is Complete” message is displayed,
Clone programmer.) The LT2000 Clone
	press any key to return to the Clone
Programmer can copy the current time
	menus option, then press ON/OFF,
to both a master TV and to the Clone’s
	POWER or ENTER. If finished, remove
internal clock; accurate to within one
	the M.P.I. Cable from the TV.
minute. (Another reason that the Clone
	E. Disconnect TV Power for 15 Seconds
programmer should be equipped with
	Unplug	the TV power cord	of the
fresh, high-quality alkaline batteries is
	newly	“Cloned TV” from the	power
for it to keep the time as accurately as

possible.)	outlet for about 15 seconds to activate
	the newly-copied Setup.

206-4065