Zenith H20J55DT warranty Detailed Descriptions for Installer Menu Items 28-I through

Installer Menu

Detailed Descriptions for Installer Menu Items 28-I through 56-I

28-I. CH. OVER RIDE (Channel Override)

If set to 1, the user can select channels with either Channel Up/Down or by direct keypad entry. If set to 0, only those channels that are entered for scanning may be selected by direct keypad entry. Note: If set to 0, Auto Program is locked out; (as shown on Setup menu) channel search is not available.

29-I. OLD OCV (On Command VideoTM)

Set to 1 for operation with systems from On Command Corporation.

30-I. ACK MASK

M.P.I. Communication Parameter. Leave at default setting unless changed by Pay-Per-View provider.

31-I. POLL RATE

M.P.I. Communication Parameter. Leave at default setting unless changed by Pay-Per-View provider.

32-I. TIMING PULSE

M.P.I. Communication Parameter. Leave at default setting unless changed by Pay-Per-View provider.

33-I. NOT USED

34-I. NOT USED

35-I. NOT USED

36-I. NOT USED

37-I. NOT USED

38-I. NOT USED

39-I. REAR VIDEO EN. (Rear Video Enable)

Set to 1 to enable rear AUX (Video) input.

Set to 0 to disable rear AUX input.

40-I. NOT USED

41-I. NOT USED

42-I. NOT USED

43-I. NOT USED

44-I. NOT USED

45-I. NOT USED

46-I. NOT USED

47-I. AUX STATUS

Set to 1 for M.P.I. AUX source to be reported as a channel number instead of channel 0. Set to 0 to disable AUX identification change.

48-I. DIS SETUP M (Disable Setup Menu)

Set to 1 to disable the Setup menu. Setup menu

will not appear. Set to 0 to enable the Setup

menu.

49-I. NOT USED

50-I. DIS VIDEO M (Disable Video Menu)

Set to 1 to disable the Video menu. Video menu

will not appear. Set to 0 to enable the Video

menu.

51-I. DIS VCHIP M (Disable V-Chip Menu)

Set to 1 to disable V-Chip menu. V-Chip menu will

not appear. Set to 0 to enable the V-Chip menu.

52-I. NOT USED

53-I. DIS CH-TIME (Disable Channel-Time OSD)

Set to 1 to disable the Channel-Time display. Channel-Time display will not appear.

Set to 0 to enable the Channel-Time display.

54-I. EN SET COL (Enable Setup Menu Color)

Set to 1 to enable custom color settings for the Setup menu. Set to 0 to disable custom color set- tings for the Setup menu.

55-I. FOR SETUP M (Setup Menu Foreground

Color) Set according to Color Chart.

0	= Black	3 = Yellow		6 = Cyan
1	= Red	4	= Blue	7 = White
2	= Green	5	= Violet

56-I. BCK SETUP M (Setup Menu Background

Color) Set according to Color Chart.

0	= Black	3 = Yellow		6 = Cyan
1	= Red	4	= Blue	7 = White
2	= Green	5	= Violet

57-I. NOT USED

58-I. NOT USED

59-I. NOT USED

Page 48 206-4065