Zenith H20J55DT warranty Installer Menu

Installer Menu

Use the Installer Menu to set up or change operational settings.

See detailed descriptions of the Installer Menu items on the following pages

Installer menu items can be accessed by using the optional installer’s remote control. Just press and hold MENU (about 8 seconds) until the menu disap- pears, then press 9, 8, 7, 6, then OK (Enter). To remove the Installer’s Menu, press OK repeatedly. Any changes you make will be stored in non- volatile memory.

The Installer menu opens with the main menu. Use MENU and Up or Down ADJ to sequence through the installer menus and submenus. Use Up or Down ADJ to scroll up/down within the

menus and submenus. To change a setting, use the Left or Right ADJ keys. Press OK to return to the main menu.

Using the Installer Menu

Items 0-I ~ 117-I are accessible only in the Installer Menu. Their numbers, descriptions, ranges, factory default settings, and a place for listing any changes made on site are given below and on the following pages.

The Factory Menu that is intended for qualified service technicians only, is not shown. XX-F Menu Items ( not shown here ) are

service type adjustments and only

qualified technicians having specialized test equipment should access them.

INSTALLERS

INSTALLER1

INSTALLER2

INSTALLER3

INSTALLER4

INSTALLER5

INSTALLER6

INSTALLER7

INSTALLER8

TV MICRO V3.00

D2A CARD V3.03

D2A CARD	- MICRO COMM
STATUS	OK

Menu	Function	Value	Default	Brief Description of Function and Comments
Item		Range	Value
0-I.	INSTALLER SEQ	0 - 3	0	Leave default set at 0.
1-I.	POWER MANAGE	0 - 7	0	Sets number of hours of no activity before auto shutoff.
2-I.	AC ON	0 / 1	0	Set to 1 to enable auto turn on at power up.
3-I.	BAND-AFC	0 - 7	1	Sets Tuning band for Analog channels.
4-I.	STRT CHANNEL	0 - 255	255	Channel at turn-on (255 for last Channel). For digital
				channels, use with item 101-I Start Minor Channel.
5-I.	CHAN LOCK	0 / 1	0	When set to 1, cannot tune from current channel.
6-I.	GHOST CH	0 / 1	0	Set to 1 to enable Ghost Channel display.
7-I.	START VOLUME	0-63, 255	255	Volume level at TV turn-on (Set 255 to retain last level).
8-I.	MIN VOLUME	0 - 63	0	Minimum volume setting.
9-I.	MAX VOLUME	0 - 63	63	Maximum volume setting.
10-I.	MUTE DISABLE	0 / 1	0	Set to 1 to disable mute function.
11-I.	NOT USED
12-I.	IR BANKS EN	0 / 1	0	Set to 1: enables TV to respond to IR codes to
				change Channel Bank directly.
13-I.	SCAN MODE	0 / 1	1	Puts TV On-Off event in Channel Up/Down sequence.
14-I.	STRT CH IN SM	0 / 1	0	Set to 1 to put TV on/off below start channel number.
15-I.	SLEEP TIMER	0 / 1	1	Set to 1 to enable Sleep Timer.
16-I.	EN TIMER	0 / 1	1	Set to 1 to enable Timer.
17-I.	ALARM	0 / 1	1	Set to 1 to enable Alarm.
18-I.	NOT USED
19-I.	NOT USED
20-I.	FEATURE LEVEL	0 / 1	1	Zen 1 Leave default set 1 (1 Zen1).
21-I.	V-CHIP	0 / 1	1	Set to 1 to enable V-Chip (Parental Control).
22-I.	MAX BLK HRS	0 - 99	12	Sets number of Parental Control blocking hours.
23-I.	CAPTION LOCK	0 / 1	0	Set to 1 to retain caption setting at turn off.

Page 42 206-4065