Zenith H20J55DT Detailed Descriptions for Installer Menu Items 60-I through, 72-I. not Used

Installer Menu

Detailed Descriptions for Installer Menu Items 60-I through 76-I

60-I. EN VIDEO COL (Enable Video Menu Color)

Set to 1 to enable custom color settings for the Video menu. Set to 0 to disable custom color set- tings for the Video menu.

61-I. FOR VIDEO M (Video Menu Foreground

Color)

0	= Black	3 = Yellow		6 = Cyan
1	= Red	4	= Blue	7 = White
2	= Green	5	= Violet

62-I. BCK VIDEO COL (Video Menu Background

Color)

0	= Black	3 = Yellow		6 = Cyan
1	= Red	4	= Blue	7 = White
2	= Green	5	= Violet

63-I. EN PTL COL (Enable V-Chip Menu)

Set to 1 to enable custom color settings for the V- Chip menu. Set to 0 to disable custom color set- tings for the V-Chip menu.

64-I. FOR PTL M (V-Chip Menu Foreground

Color) Set according to Color Chart.

0	= Black	3 = Yellow		6 = Cyan
1	= Red	4	= Blue	7 = White
2	= Green	5	= Violet

65-I. BCK PTL M (V-Chip Menu Background

Color) Set according to Color Chart.

0	= Black	3 = Yellow		6 = Cyan
1	= Red	4	= Blue	7 = White
2	= Green	5	= Violet

66-I. NOT USED

67-I. NOT USED

68-I. NOT USED

69-I. EN CH-T COL (Enable CH-Time OSD Color)

Set to 1 to enable custom color for the Channel- Time display. Set to 0 to disable custom color for the Channel-Time display.

70-I. FOR CH-T COL (Channel-Time Display

Foreground Color)

0	= Black	3 = Yellow	6 = Cyan
1	= Red	4 = Blue	7 = White
2	= Green	5 = Violet

Note: If foreground and background color are the same, menu background is transparent.

71-I. BCK CH-T COL (Channel-Time Display

Background Color)

0	= Black	3 = Yellow	6 = Cyan
1	= Red	4 = Blue	7 = White
2	= Green	5 = Violet

Note: If foreground and background color are the same, menu background is transparent.

72-I. NOT USED

73-I. CH NOT AVBLE (Channel Not Available)

When set to 1 and channel override is set to 0, “NOT AVAILABLE” message is displayed when directly accessing a channel not in the favorite channel list. (Applies to NTSC Channels Only.)

74-I. CH-TIME SIZE

If set to 1 and transparent background is selected for Channel-Time display, (foreground color = back- ground color and custom color enabled) a large channel number is displayed instead of the normal Channel-Time display.

75-I. REVERT CH (Revert Channel)

If set to 1 and loss of M.P.I. communication occurs, TV automatically tunes to the specified Start Channel.

76-I. DEFEAT XDS

Set to 1 to disable XDS display. Set to 0 to enable XDS display. XDS data (provided at the discretion of the broadcaster), is available only on analog channels. After a channel change, wait 5 seconds then press ENTER to see XDS data, if available.

206-4065 Page 49